User's Manual

12
Sequence View
In sequence view, the monitor switches between up to four cameras every 6 seconds. For example, the
monitor displays channel 1 for 6 seconds, then channel 2 for 6 seconds and so on. The monitor only
switches to the channels that are paired with a camera.
To enable Sequence view:
• Press the SEQ/Quad button once to enter sequence mode.
To exit Sequence view:
• Press the SEQ/Quad button.
Quad View
You can view all of the paired cameras in quad view. The video monitor supports a maximum of four
cameras.
To view multiple cameras in quad view:
• Press the SEQ/Quad button twice on the video monitor.
To exit quad view:
• Press the SEQ/Quad button repeatedly to exit quad mode.