User's Manual

14
Using the Scan feature
The Scan feature temporarily turns off the video monitor, and waits for a camera to detect a noise. Once
one of the cameras detects sounds, the video monitor automatically turns on, and beeps to notify you.
This feature is especially useful if you have multiple cameras, and only want to view the camera that
detects a sound (i.e. infant crying).
To enable the Scan feature:
• Press the Scan button.
To disable the Scan feature:
• Press the Scan button to turn off the Scan feature.
NOTE: The first camera to detect a sound will trigger the video monitor to turn on. After several seconds,
the monitor turns off, and begins monitoring the cameras again.
Turning the video monitor screen on/off
Turning off the video monitor screen allows you to listen to audio from the camera, while the video
monitor screen is off. For example, if you want to monitor a baby’s room at night while you sleep, you can
turn off the video monitor screen to conserve power, and at the same time listen to the camera audio.
To turn the video monitor screen on/off:
• Press the Video button to turn the screen off.
• Press the Video button again to turn the screen on.