User's Manual

12
The picture is or has become
choppy
The picture may become choppy when experiencing a lower frame
rate (i.e. 10 frames per second vs. a higher 20 frames per second).
1. Try moving the camera closer to the receiver.
2. Remove obstructions between the receiver and camera.
3. Adjust the monitor antenna to vertical position.
Specifications
Lcd monitor
Receiving Frequency Range 2400Mhz~2483.5Mhz
Data Rate 4 Mbps
Receiving Sensitivity -81dBm
Modulation Type GFSK with FHSS
Lcd Panel size 7 Inch
Lcd Resolution 800 RGB (H) x 480 (V)
View Angle H: 140° V: 110°
Power Requirement 5V DC 2A ±5%
Power Consumption 1.03A
Operating Temperature 14°F ~ 104°F (-10°C ~ 40°C)
Operating Humidity 0% ~ 85%
Camera(s)
Transmit Frequency Range 2400Mhz~2483.5Mhz
Data Rate 4 Mbps
Transmitting Power 16dBm (TYP)
Modulation Type GFSK with FHSS
Transmitting Distance 150m (Line of Sight)
Image Sensor Type 1/4” Color CMOS Image Sensor
Effective Pixels H: 640 V: 480
Image Processing MPEG 4
Image Resolution / Frame Rate
Cam x 2 : VGAx2 @ 30 fps
Cam x 4 : QVGAx4 @ 30 fps/VGA x 4 @ 10
fps
Lens TBD
Viewing Angle (Diagonal) TBD
Minimum Illumination <5 Lux (IR On), >30 Lux IR Off
IR LED / Night Vision Range 8 Leds / 850nm, 5m (with IR Led)
Power Requirement 5V DC 1A ±5%
Power Consumption
350mA
600Ma with IR on
Operating Temperature 14°F ~ 104°F (-10°C ~ 40°C)
Operating Humidity 0% ~ 85%