User's Manual

6
Viewing Mode
1. Signal Indicator – The signal indicator shows the strength of the signal being received from the
camera. The number of bars in the signal indicator shows the strength of the signal – One or No Bars
indicates the signal is poor, and 4 bars indicate a very strong signal.
Signal Indicators:
2. Channel Indicator – Displays the current channel number. Press the cam button on the receiver to
switch between available cameras.
3. SD Card indicator- This graphic displays if an SD card is inserted into the monitor.
If blue, recording space is available.
If red, the SD card is full.
4 Room temperature indicator- the room temperature indicator indicates the temperature measured by
the baby unit. Make sure temperature sensor of the baby unite is pointed away
from the camera to enable more accurate measurements.
5 Talk indicator- this icon appears when the talk button is pressed. You can now talk through the
baby unit
6 Manual Recording indicator- While in manual recording, this icon
will display on the screen .