User's Manual

Wireless Receiver
Front Controls
1. Cam--- Press the button to view cameras in
automatic switching mode.
2. Quad---- Press Quad button to view the images
in quad mode. Press Quad buttons to exit from quad
mode to automatic switching mode
3. Scan--- Press the button to switch the receiver to
scan mode. When there’s motion detected by
cameras, the LCD will lighten up and show the live
video from the camera.
4. Zoom---- In “×1” mode, press to enter “×2”
mode,
shows on the screen; In “×2” mode, press it again to enter “×1” mode, doesn’t
show on the screen.
5. Delete---- Press it to delete the video.
6. Menu---Press Menu button to access the receiver menu. Press the key again to exit.
7. Joystick---
A. Navigation button (▲▼◄► arrows): servicing button
B. Enter button: Push to enter Playback mode.
8. LCD Screen--- Displays video from the camera(s) or displays system operations.
Top Controls
9. Motion--- Press this button to enter auto
recording mode. Receiver starts to record
when there is motion detection in camera
side.
10.Rec---Press this button and receiver starts
to record manually.
11. Power---Press this button to power on/off the receiver.
12. Vol/Adj---- Press the left part to decrease the volume and press the right part to increase the volume.