User's Manual

1 Signal Indicator –The signal indicator shows the strength of the signal being received from the
camera. The number of bars in the Signal Indicator shows the strength of the signal. One, or no bars
indicates the signal is poor, and 4 bars indicate a very strong signal.
Note
• If the signal is low (e.g.,1 or 2 bars) adjust the antennas, or reposition the cameras or receiver for
best performance.
• The signal indicator is not shown during Quad mode.
Signal Indicators:
OUT OF RANGE Warning
When the receiver can’t get signal from cameras, warning message will be displayed. Reposition the
camera, or check the camera power connection.
2 Channel Indicator–Displays the current channel number you are presently viewing. If viewing
multiple cameras at once, the camera indicator will appear above each video display. Press Cam to
switch between available cameras.
Note: In auto switch mode, press Quad to enter quad mode.
3 SD Card Indicator – When a SD card is inserted into the SD card slot, the indicator will be shown on
the LCD screen. A white icon shows that a SD card with available recording space is inserted in the
receiver. A red icon indicates the SD card is full.