User's Manual

Basic Setup

Optional: Charging the camera

The camera base has a built-in battery compartment where you can install three AA

batteries. This may be useful if you want to temporarily monitor an area with no power

outlets.

To install batteries in the camera:

1 Unplug the power cord from the base

of the camera.

2 Remove the battery cover.

3 Insert three AA batteries into the

battery compartment and replace the

battery cover.

NOTE: You can insert rechargable

batteries into the camera base.

Connect the power adapter into

the camera base to charge the batteries. Charge the batteries for 4.5 hours for a

full charge.

NOTE: To order rechargable batteries, contact Lorex customer support at XXXXXXX and

inquire about part number XXXXXX.

To charge the camera battery:

1 Insert 3 AA batteries into the battery

compartment.

2 Plug the power adapter labeled "For Camera"

into a power outlet.

3 Connect the end of the power adapter into the

port labeled DC5V.

Remove battery cover from camera base.

Connect the power adapter

into the DC5V port