WIRELESS SECURITY CAMERA INSTRUCTION MANUAL ENGLISH VERSION 1.0 LW2231 www.lorextechnology.
Thank you for purchasing this product. This manual refers to the following models: • LW2231 To learn more about this product and to learn about our complete range of accessory products, please visit our website at: www.lorextechnology.com CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RICK OF ELECTRIC SHOCK DO NOT REMOVE COVER. NO USER SERVICABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
NEED HELP? CO NTACT US F IR S T DO NOT RETURN THIS PRODUCT TO THE STORE Please make sure to register your product at www.lorextechnology.com to receive product updates and technical support. 2 Easy Ways to Contact Us Online: Product Support is available 24/7 including product information, user manuals, quick start up guides and FAQ’s at www.lorextechnology.com/support For all other matters, visit www.lorextechnology.
VIEW YOUR WORLD™ VOIR VOTRE MONDEMD VEA SU MUNDO™ ¿NECESITA AYUDA? BESOIN D’ASSISTANCE? COMUNÍQUESE PRIMERO CON NOSOTROS COMMUNIQUEZ D’ABORD AVEC NOUS NO DEVUELVA ESTE PRODUCTO A LA TIENDA NE RETOURNEZ PAS CE PRODUIT AU MAGASIN Por favor, registre su producto en www.lorextechnology. com para recibir actualizaciones del producto y asistencia técnica. Veuillez enregistrer votre produit sur le site www.lorextechnology.com afin de recevoir des mises à jour et le soutien technique pour votre produit.
B E F O R E Y O U S TA R T Please make sure to register your product at www.lorextechnology.com to receive product updates and technical support THIS PRODUCT MAY REQUIRE PROFESSIONAL INSTALLATION LOREX IS COMMITTED TO FULFILLING YOUR SECURITY NEEDS • We have developed user friendly products and documentation. Please read the Quick Start Guide and User Manual before you install this product. • Consumer Guides and Video Tutorials are available on our web site at www.lorextechnology.
AVANT DE COMMENCER ANTES DE EMPEZAR Veuillez enregistrer votre produit sur le site www.lorextechnology.com afin de recevoir des mises à jour et le soutien technique pour votre produit. Cerciórese de por favor colocar su producto en www.lorextechnology.com para recibir actualizaciones y la información del producto y soporte técnico.
Important Safeguards In addition to the careful attention devoted to quality standards in the manufacture process of your product, safety is a major factor in the design of every instrument. However, safety is your responsibility too. This sheet lists important information that will help to ensure your enjoyment and proper use of the product and accessory equipment. Please read them carefully before operating and using your product. General Precautions 1.
Installation (Continued) Service 10. Ventilation - Slots and openings in the case are provided for ventilation to ensure reliable operation of the product and to protect it from overheating. These openings must not be blocked or covered. The openings should never be blocked by placing the video equipment on a bed, sofa, rug, or other similar surface. This product should never be placed near or over a radiator or heat register.
Features • Real-time (up to 30fps) wireless video with MPEG-4 compression @ 640x480 (VGA) resolution1 • Extended bandwidth delivers super smooth high frame rate video1 • SignalGuard Technology continuously monitors the wireless signal and automatically reconnects upon detecting low signal strength • Next generation adaptive Frequency Hopping Spread Spectrum (FHSS) technology greatly reduces conflicts with competing signals • Built-in microphone for listen-in audio2 • Built-in auto-mechanical infrared camer
Table of Contents 1. Getting Started . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 2. Wireless Receiver. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 3. Wireless Camera . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 4. Installing the Camera. . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 4.1 Installation Warnings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 4.2 Mounting Positions . . . .
x
Getting Started 1. Getting Started The system comes with the following components: 1 X WIRELESS CAMERA 1 X MOUNTING KIT (Mounting kit contents may differ from image) 1 X WIRELESS RECEIVER 1 X WHITE CAMERA ANTENNA (PRE-ATTACHED) 2 X POWER ADAPTERS (FOR CAMERA & RECEIVER) 1 X BLACK RECEIVER ANTENNA (PRE-ATTACHED) 11 WIRELESS SECURITY CAMERA INSTRUCTION MANUAL ENGLISH VERSION 1.0 LW2231 1 X BNC-TO-RCA ADAPTER 2 X DOUBLE-SIDED TAPE www.lorextechnology.
Wireless Receiver 2. Wireless Receiver 1 2 3 1 Removable Antenna (SMA Type): Pre-attached to the receiver. 2 Pairing Status LED: Glows green continuously when a camera is paired to the receiver. Flashes on and off slowly when pairing mode is active and flashes rapidly when camera is out of range. 3 Pairing Button: For details, see “Pairing Cameras” on page 9. 4 DC Power: Connect power adapter to power on the receiver.
Wireless Camera 3. Wireless Camera 2 3 4 1 5 1 Microphone 2 Removable Antenna (SMA Type): Pre-attached to the back of camera. 3 Camera Stand 4 DC Power: Connect power adapter to power on the camera. 5 Pairing Button: For details, see “Pairing Cameras” on page 9. 6 Antenna Jack 6 ATTENTION - This camera includes an Auto Mechanical IR Cut Filter. When the camera changes between Day/Night viewing modes, an audible clicking noise may be heard from the camera.
Installing the Camera 4. Installing the Camera Camera is suitable for outdoor installation. Installation in a sheltered location is recommended. For example, install under shelter protected from the elements, such as beneath roof eaves. The diagram to the right shows an example of an ideal location for outdoor placement. 4.
Installing the Camera 4.2 Mounting Positions You may mount your camera on a wall, ceiling, or counter. See the images below for recommended configurations of the camera stand and antenna. Wall Ceiling Counter NOTE: For ceiling installation, position the antenna as high as the ceiling allows. See the "Ceiling" mounting position in the figure above.
Installing the Camera 2 Loosen the thumbscrews (1, 2) and the adjustment ring (3) by turning them counter clockwise. 1 2 3 3 Adjust the angle of the camera until the desired view is set. Tighten the thumbscrews and the adjustment ring to secure the camera’s position. 4 Connect the power cable from the camera to the weatherproof power connector. Plug the power adapter into a power outlet or surge protector. NOTE: Power cables are only weatherproof when fully inserted at the connection point.
Connecting to a DVR 5. Connecting to a DVR Before powering on the receiver, make sure to first connect and power on the camera. This will ensure a proper connection. 1 2 3 1 Connect the BNC video cable from the receiver to the video input on your DVR. 2 Connect the RCA audio cable from the receiver to the corresponding audio input. The audio input number or name should match the video input where you connect the BNC cable (e.g. Video Input 1 and Audio Input 1).
Connecting to a TV 6. Connecting to a TV 2 3 1 1 Connect the included BNC-to-RCA adapter to the BNC connector on the receiver. Connect the other end of the BNC-to-RCA adapter to the RCA video input on your television. 2 Connect the RCA audio connector from the receiver to the audio input on your television. 3 Connect the power cable to the power port on the receiver and plug it into a power outlet or surge protector. 4 Power on your television and select the input that the receiver is connected to.
Pairing Cameras 7. Pairing Cameras IMPORTANT The camera and the receiver have already been paired out of the box, which means that they are exclusively communicating with each other. If for some reason the pairing is lost, follow these steps to pair the camera and receiver. To pair the camera to the receiver: 1 Make sure that the camera and receiver are both powered up and all antennas are properly attached. 2 Press and hold the PAIR button on the receiver for 5 seconds to activate pairing mode.
Appendix A: System Specifications 8. Appendix A: System Specifications 8.1 General Specifications TX Frequency Range 2.400GHz~2.480GHz TX Power 16dBm Unobstructed Effective Range 165ft (50m) indoor 500ft (152m) outdoor1 Data Rate 4 Mb/s Modulation GFSK Spread Spectrum FHSS Operating Temperature Range 14°F ~ 122°F / -10°C ~ 40°C 1. Maximum wireless transmission range. Actual range dependent upon building materials and other obstructions in path of wireless signal. 8.
Appendix B: Frequently Asked Questions 9. Appendix B: Frequently Asked Questions 9.1 Wired vs. Wireless Cameras A wired camera has a video cable that transmits the video signal from the camera to a recording or viewing device. A wireless camera does not use a video cable. Instead, it wirelessly transmits the video signal to a wireless receiver that is connected to your DVR. Wireless cameras do not require video cabling to be run between the camera and the DVR, which reduces installation time and cost. 9.
Appendix B: Frequently Asked Questions Signal Reduction Through Materials Signal strength decreases as it passes through different types of material. The table below shows how signals become reduced when passing through different materials: Material Signal Reduction (%) Plaster & Wood 10 - 30% Brick 30 - 50% Concrete Cinder Blocks 50 - 70% Metal & Metal Cladding 70 - 90% NOTE: Signals that must pass through wet or moist materials (e.g. shrubs and trees) may be significantly reduced.
Appendix C: Troubleshooting 10. Appendix C: Troubleshooting If you have problems with your system, there is often a quick and simple solution. Please try the following: Problem Solution There is no picture from the camera(s) • Make sure that the camera is plugged into a power outlet and that the power adapter is plugged in properly. • Make sure receiver is plugged into a power outlet. • Move the camera closer to the receiver. • Make sure BNC video output cable is connected to your DVR or television.
Appendix D: Extending Wireless Signal Range 11. Appendix D: Extending Wireless Signal Range DISCLAIMER: Certain accessories are not available in all markets. There are several ways to boost your wireless signal as well as options to help you extend the range of the wireless signal. Clear Line-of-Sight You should always try to ensure there is a clear line-of-sight between the camera and the receiver.
Appendix D: Extending Wireless Signal Range 2.4 GHZ Directional Wireless Panel Antenna Use the 2.4GHz Directional Wireless Panel Antenna (model #: ACCANTD9) to focus a wireless signal onto the camera in order to increase the range of transmission (clear line-of-sight between the camera and the antenna is required). A 20ft extension cable is included to help to properly position the antenna.
LW2231 Vers i o n 1 .0 www.lorextechnology.com Copyright © 2013 Lorex Technology Inc.
Note : Cet appareil est conforme à la Partie 15 des règlements de la FCC et aux normes RSS de l’Industrie du Canada. Son fonctionnement est soumis aux deux conditions suivantes : (1) cet appareil ne doit pas causer des interférences nuisibles, et (2) cet appareil doit accepter toute interférence reçue, y compris les interférences qui peuvent provoquer un fonctionnement indésirable.