Thanks for your purchasing of the 45236 Wireless Color Surveillance System. The 45236 kit is a combined wireless color camera & video monitor/receiver. An ideal combination for watching the baby, monitoring the porch, pets, yard or the pool. It is also suited to many small business applications. Features/// *900MHz wireless technology *2.
.To use the camera power adapter, connect power jack to the rear of the tabletop base. Make sure the Camera is within reach of an AC power outlet. 4.Select the camera operating channel on the slide switch by moving slide switches to 1, 2channels’ position. Switch is preset to channel 1. 5. The Camera (Transmitter) installation is now complete. Installing the LCD Monitor/// Main Operation 1.Plug AC power supplier of the LCD monitor into the power jack in the rear of the LCD monitor base. 2.
The sensitivity of sound trigger can be adjusted by turning the knob “sensitivity adjust tuner. Operating Modes/// The wireless system can be set to operate in one of three modes: Scan, Auto or Manual. The desired operating mode can be selected using the buttons on the front panel of the LCD monitor. Scan Pressing the Scan button places the system in Scan mode. The LCD monitor screen blanks into a standby mode while the system continuously scans the active cameras.
monitor will switch to a different camera each time the Manual button is pressed. When the camera detects loud sound, the beeper will sound. To avoid searching channels that do not have cameras assigned to them, set the DIP switches (inside the battery compartment) for those corresponding channels to the Off position. Monitor Functions/// Power Press to turn the monitor on/off. Alarm Volume The Alarm Volume of the LCD monitor can be adjusted by tuning the Alarm volume tuner on the top of the LCD monitor.
Blank Monitor Interference on Camera picture Audio Problems Specification/// Camera (Transmitter): TV System: Image Sensor: Integrated Lens: Resolution: Audio Signal/Noise Ratio: Video Signal/Noise Ratio: Frequency Range: High Speed Electronic Shutter: LED: Mini. Illumination: Current Consumption: Modulation: Channel Selection: Overall size: Monitor (Receiver) Frequency Range: Current Consumption: Channel selection: correct channel(s). 3. Make sure camera(s) is within range of monitor (receiver). 1.
Signal/Noise Ratio: Battery Voltage: Lithium Polymer (For Monitor): 38dB Li-Polymer 7.4V for monitor Battery standby , Approx 3 hrs. continuous > 2.5 hrs. General Operating temperature: Humidity: -10°C to 40°C 14°F to 104°F Less than 85% Approvals/// This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: 1.This device may not cause harmful interference, and 2.
