900MHz Wireless Color Baby Camera System Includes: Color Video/Audio Camera & LCD Monitor
Congratulations on your purchase of the 900MHz Wireless Baby Care Color Camera System (CMS2727). The System consists of a wireless LCD Monitor and a wireless color day & night Baby Camera. An ideal product for watching the baby, elder or patient application. Features /// * 900MHz wireless technology * Plug & play installation * The system supports up to 3 cameras * 2.
4. You can adjust the sensitivity for the sound alert feature by adjusting the SOUND TRIGGER knob found on the side of the Camera. 5. The Camera (Transmitter) installation is now complete. Night Vision /// The Camera includes IR LEDs, which allows viewing up to 5 feet in the dark automatively when used with the adapter. Adjust the “brightness” knob may get better display for darkness use. Night Light /// The friendly designation is the button for night light which is located on the top of the camera.
* Adjust Brightness as required using +/- button on the right side of the LCD Monitor. * The Sensitivity of Sound Trigger can be adjusted by Baby Camera’s TRIGGER LEVEL knob. * The most common source of interference are microwave ovens, WiFi products. Try to avoid mounting the LCD Monitor near a microwave oven or other source of RF interference such as cordless phones, WiFi products. * To avoid the interference from camera, we recommend you set your WiFi at channel 10.
channels to the OFF position. The dwell/cycle time (time taken to switch between cameras) is preset to four seconds and can be adjusted between 2-30 seconds. To adjust the dwell/cycle time, press both the AUTO and MANUAL buttons simultaneously. Each flash of the LED increases the dwell time by one second. MANUAL To select a specific Camera to LCD Monitor, press the MANUAL button. The LCD Monitor will switch to a different Camera each time the MANUAL button is pressed.
Blank monitor 1. Make sure monitor is switched ON. 2. If using AC adapter, make sure it is plugged in. 3. Make sure rechargeable battery is charged. Interference on camera picture 1. Make sure each camera (transmitter) is within range, and that no large obstructions are blocking the signal. 2. Try repositioning the camera, monitor or both to improve the reception quality. 3. Reposition other nearby equipment transmitting on 900MHz frequency. Audio problems 1.
Humidity Less than 85% Approvals /// This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FCC NOTE: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment.
