User's Manual

Blank monitor 1. Make sure monitor is switched ON.
2. If using AC adapter, make sure it is plugged in.
3. Make sure rechargeable battery is charged.
Interference on 1. Make sure each camera (transmitter) is within range, and
camera picture
that no large obstructions are blocking the signal.
2. Try repositioning the camera, monitor or both to improve
the reception quality.
3. Reposition other nearby equipment transmitting on
900MHz frequency.
Audio problems 1. Ensure the volume is turned up sufficiently on the monitor.
2. Make sure the sound is within the microphone range.
3. If the unit emits a loud wailing sound
(feeds back), try moving the camera away from
the monitor or angle the monitor differently.
Specifications ///
Camera (Transmitter) TV System NTSC or PAL standard
Integrated Lens 5.6mm, fixed focus
Resolution 360 horizontal TV lines
Signal/Noise Ratio 48dB
Image Sensor 1/3” CMOS
Min. Illumination 0.1 lux Current
Consumption 150 mA
Frequency Range 910, 920MHz
Modulation FM
Channel Selection Electronic tuning with PLL
Overall Size 2.0"W*3.2"H*3.1"D
Monitor (Receiver) Frequency Range 910, 920MHz
Current Consumption 350 mA
Channel Selection Electronic tuning with PLL
Signal/Noise Ratio 38dB
Battery (for Monitor) Voltage 7.4V
Li-polymer Battery Pack approx. 2.5 hrs. Continuous
(Build-in) > 5 hrs. standby
Battery (for Camera) Rechargeable Battery Pack approx. 4 hrs. Continuous
(Optional)
General
Operating Temperature -10oC to 40oC
14oC to 104oF