User's Manual

❑ Wireless Camera ❑ Monitor
❑
Fixing kit
❑
1 x 9V Camera Adapter
❑ 1 x 13.5V Monitor
SETUP INSTRUCTIONS
Camera Transmitter
1. Unpack the Camera/ Transmitter
2. Decide on wall or desk/table mounting the camera. If wall mounting
there is a useful drilling guide on the back cover of these
instructions. The camera can be adjusted for both by rotating the
camera head to the required position.
3. Decide whether to connect using AC power or battery (not
included). If using batteries please install appropriative LI polymer
batteries. If using the power adapter, remove Battery and connect
power jack. Make sure the camera is positioned no more than 51/2
feet from an AC power outlet.
4. Select the channel on the slide switch under the camera housing by
switching Left or Right. Switch is preset to Channel 1.