User's Manual

TROUBLE SHOOTING
If you are having trouble operating this product, please consult the guide below:
SYMPTOM REMEDIES
No camera picture
1. Check all connectors. Make sure camera(s) and receiver are
switched ON.
2. Ensure camera(s) and receiver are set to correct channel(s).
3. Make sure camera is within range of receiver.
Blank monitor
1. Make sure receiver is switched ON.
2. If using AC adapter, make sure it is plugged in.
3. If using batteries, make sure they are installed correctly, or
try recharging(replacing) them.
Interference on camera
picture
1. Make sure each camera (transmitter) is within range, and
that no large obstructions are blocking the signal.
2. Try repositioning the camera, receiver or both to improve the
reception quality.
3. If a camera is positioned close to the receiver, point antenna
away from the receiver.
4. Reposition other nearby equipment transmitting on the
900MHz frequency.
Audio problems
1. Ensure the volume is turned up sufficiently on the Monitor
(or TV).
2. Make sure the sound is within the microphone range.
3. If the unit emits a loud wailing sound (feeds back), try
moving the camera away from the receiver or angle the
receiver differently.
SPECIFICATIONS
Camera
TV System PAL or NTSC
Integrated Lens 5.6mm, F2.0 fixed focus
Resolution 360 horizontal TV Lines
Signal/Noise Ratio 46 dB
High-Speed Electronic Shutter 1/60 - 1/15,000 sec
Image Sensor 1/4” CMOS
Min. Illumination 0.1 lux
Current Consumption 80~140mA
Overall Size
2.35”W x2.74Hx3.16D
Frequency Range
910 - 920 GHz
Modulation
FM
Video Signal/Noise Ratio 46db
Audio Signal/Noise Ratio
45db
Channel Selection Electronic tuning
Case Finish UV resistant ABS plastic
Receiver/Monitor
Frequency Range 910 - 920 GHz
Signal/Noise Ratio 40dB