900MHz Wireless Receiver system
Congratulations on your purchase of the 900 MHz Wireless Receiver Systems (WRS45234). WRS45234 consists of a wireless receiver and a wireless color Camera, The WRS45234 Wireless receiver surveillance system is an ideal combination for monitoring the porch, watching the yard, pool, pets or the baby. It is also suited to many small businesses. .
LI-polymer special battery to the camera. If using the 9V camera power adapter, just connect power jack. Make sure the Camera is positioned no more than 5 1/2 feet from an AC power outlet. 4. Select the Camera operating channel under the housing of the camera by moving the slide switch to position 1 or 2. Switch is preset to channel 1 . The Camera (Transmitter) installation is now complete. SETTING UP THE RECEIVER 1.
have cameras/transmitters assigned to them, set the slide switch (located on the rear panel of the receiver) for those corresponding position. When you have selected a channel with an active camera, that video will appear on your TV screen. CAM1 IN USE CAM1 AND 2 IN USE ALL IN USE AUTO MODE To have the receiver automatically rotate through the channels, press the AUTO button on the top panel of the receiver.
MHz frequency. Audio problems 1. Ensure the volume is turned up sufficiently on the TV. 2. Make sure the sound is within the microphone range. 3. If the unit emits a loud wailing sound (feeds back), try moving the camera away from the receiver or angle the receiver differently. SPECIFICATIONS Camera TV System Integrated Lens Resolution Signal/Noise Ratio High-Speed Electronic Shutter Image Sensor Min.
(2) this device must accept any interference received, including interference that may cause undesired operation. FCC NOTE: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modifications could void the user's authority to operate the equipment.