Instructions / Assembly

LEVEL RAIL

Transform is designed to exceed the most stringent building codes. For most

installations everything you need is in the box. When installing spans that are greater

than 91" under certain International Building Code conditions, an additional stiffener*

may be necessary. Please check Transform’s CCR report for the most up to date

technical information and install accordingly.

An evaluation report is available through your Transform Dealer, RDI Customer Service

or online at http://www.rdirail.com/support/code-testing-reports.html.

COMPONENTS:

Depending on the level kit and kit length that you’ve purchased, your component list

will vary. Use this as a guide to identify the individual components.

Warning:

Always wear

safety goggles.

Needed for Installation 6' Rail Kit 8' Rail Kit

A.) Top Rail 11

B.) Bottom Rail 11

C.) Bottom Beam 11

D.) Top Beam 11

E.) Balusters needed - quantities are for both square & round** balusters 15 20

F.) Set Screw (#6 x ¾") 4 4

G.) Screw (#10 x 2.5") 12 12

H.) Screw (#12 x 5") 12

I.) Screw (#10 x 2" - not painted - for stair/level angle application)

J.) Screw (#10 x 2" - painted to match rail color)

K.) Baluster Plug - comes pre-inserted in square balusters 30 40

L.) Mounting Bracket 44

M.) Bottom Rail Support 1 2

*N.) Resalite™ Stiffener (shape varies by top rail pro le - Sold Separately)

Need a little help installing your railing?

www.rdirail.com/support/installation-videos.html

**If using round aluminum balusters, ensure that there are enough baluster shoes (sold separately) for the top and bottom of each baluster.