Instructions / Assembly

10
(Fig. 2) (Fig. 3)
(Fig. 1)
1.
Prepare all posts and mounting surfaces
before installation. If using a trim ring, be
sure to install trim ring prior to fastening
bottom rail.
NOTE: Check with your local building
code of ce for design load requirements
for guard rails and bottom space
requirements. All supporting structures
should be built in accordance with
applicable building codes.
2.
Temporarily secure a plank on the nose
of the stairs along side of the posts onto
which you are installing the stair rail
(Fig. 1). The thickness of the plank will
determine the space between the stairs
and the bottom rail (Fig. 2).
NOTE: Depending on the angle of your
stair, code may require you to mount
the bottom beam to the tread noses (no
plank). Check with your local building
of ce for applicable regulations.
3.
Center the bottom beam (C) on plank
between posts with the  at surface of
the bottom beam facing down. Trace the
angle of the posts at the inside edge of
the posts onto the bottom beam (Fig. 3).
STAIR KITS
C - bottom beam