Instructions / Assembly

7
(Fig. 23)
(Fig. 22)
(Fig. 24)
(Fig. 25)
13.
If needed, an additional rail stiffener
(N) can be purchased separately, and
installed in place in top rail (A) as shown
below.
Measure for length (Fig. 22) and cut the
top rail (A) with stiffener (N) to  t (Fig.
23).
14.
Snap the top rail (A) onto the top beam
(D). Work from one end of the rail to the
other until the full length of the top rail
locks into place (Fig. 24).
15.
Using the painted screws (J) install two
of the screws upward from underneath
through the pre-drilled location. This will
secure the bracket, beam, and top rail
together (Fig. 25). Repeat for the other
end of the rail.
Top rail pro les: Emerge, Presence, Aspire
If using stiffener,
insert into top of
top rail as shown.
Stiffener shape will
vary based on top
rail pro le.
½"