Installation Guide

ENGLISH
3
COMPONENT LIST
Depending on the level kit and kit length that you’ve purchased, your component list will
vary. Use this as a guide to identify the individual components.
NEEDED FOR INSTALLATION 6' RAIL KIT 8' RAIL KIT
A.) Top Rail 11
B.) Bottom Rail 11
C.) Bottom Beam 11
D.) Top Beam 11
E.) Balusters needed - quantities are for both square & round** balusters 15 20
F.) Set Screw (#6 x ¾") 44
G.) Screw (#10 x 2.5") 12 12
H.) Screw (#12 x 5") 12
I.) Screw (#10 x 2" - not painted - for stair/level angle application)
66
J.) Screw (#10 x 2" - painted to match rail color)
44
K.) Baluster Plug - comes pre-inserted in square balusters 30 40
L.) Mounting Bracket 44
M.) Bottom Rail Support 12
N.) Drill Guide 11
*O.) Resalite
®
Stiffener (shape varies by top rail prole - Sold Separately)
P.) Square Driver
**If using round aluminum balusters, ensure that there are enough baluster shoes (sold separately) for the top and bottom of each baluster.
– Safety goggles
– Tape measure
– Pencil
– Level
– Power screwdriver/drill
– Power saw
– Straight edge/ruler/triangle
– Masking tape
TOOLS NEEDED:
A
B
C
D
F
H
G
I
E
J
KL M
O
N
P
Read all instructions prior to installing product.
Refer to local building codes for installation requirements; failure to install this product in
accordance with building codes may affect safety of the product and void product warranty.
Refer to manufacturers safety instructions when operating any tools.