Instructions / Assembly

COMPONENTS:

Depending on the stair kit and kit length you purchased your component list will vary.

Use this as a guide to identify the individual components.

Warning:

Always wear

safety goggles.

Needed for Installation 6' Stair Rail Kit 8' Rail Section

A.) Top Rail 11

B.) Bottom Rail 11

C.) Bottom Beam 11

D.) Top Beam 11

E.) Balusters needed - quantities are for both square & round* balusters 15 20

F.) Set Screw (#6 x ¾") 4 4

G.) Screw (#10 x 2.5") 12 12

H.) Screw (#12 x 5") 12

I.) Screw (#10 x 2" - not painted - for stair/level angle application)

J.) Screw (#10 x 2" - painted to match rail color)

K.) Baluster Plug - varies by baluster type; comes pre-inserted into baluster 30 40

L.) Mounting Bracket 44

M.) Bottom Rail Support 1 2

N.) Resalite™ Stiffener (shape varies by top rail pro le)

O.) PVC Glue (included with 6' stair kits and stair baluster boxes) 1 -

*If using round aluminum balusters, ensure that there are enough baluster shoes (sold separately) for the top and bottom of each baluster.

STAIR RAIL

Transform is designed to exceed the most stringent building codes. For most

situations everything you need is in the box. When installing spans that are greater

than 91" under certain International Building Code conditions, an additional stiffener

may be necessary, please check Transform’s CCR report for the most up to date

technical information and install accordingly.

An evaluation report is available through your Transform Dealer RDI Customer Service

or online at http://www.rdirail.com/support/code-testing-reports.html.

Need a little help installing your railing?