Installation Guide

ANGLED RAIL WITH VINYL TOPPER AND POST INSTALLATION

Template

Install angle brackets

a. With base trim installed on bottom of vinyl post,

unroll paper install template and tape to post,

ensuring the bottom of the template rests on the top

of the base trim as speciﬁ ed. Predrill through marked

locations on installation template "A" (not "L") into

vinyl post with a

⁄

⁄64⁄

" drill bit. Do this for all marked

locations for both top and bottom brackets.

b. Install the angle brackets at the respective heights

instead of line brackets. NOTE: The base of the angled

bracket installs horizontally in orientation (screws

beside each other)

c. Attach top and bottom bases to posts with

#10 x 1

⁄

⁄2"⁄

ﬂ at head screws provided (2 per bracket).

2" ﬂ at head screws provided (2 per bracket).2"

Make sure base trim is installed

Closely follow post installation instructions for vinyl posts.