Installation Guide

4
7830 Freeway Circle, Middleburg Hts, Ohio 44130 | 1-877-265-2220 | barretteoutdoorliving.com
1
8
Finyl Line T-Top Railing Can Be Installed At Angles With Three Methods/Options:
I. Using pre-molded adapters (at 22.5° or 45°)
II. Using adjustable “Swivel” brackets
III. Using field cut angle brackets
I. 22.5°/45° Pre-Molded Adapters:
a. Measure distance between post from inside corners (Fig. 1) that will be using the pre-molded adapter
and the next post. Subtract ¾" from that distance and that will be the length you will need to cut your top
and bottom rails (Fig. 1).
b. Install railing as outlined in level rail section, noting the following:
Place adapter between brackets and posts. Pre-drill and use the longer 3" screws provided with
adapters to connect to the post (Fig. 2).
Install the Crush Block Cover:
a. Attach the crush block to the deck surface using support
foot screw and snap the cover into place (Fig. 18) .
Fig. 1
Fig. 2
ANGLED RAIL INSTALLATION:
X-
3
⁄4"
Post
Adapter
Rail
Top View
Fig. 18