Installation Guide

9
7830 Freeway Circle, Middleburg Hts, Ohio 44130 | 1-877-265-2220 | barretteoutdoorliving.com
Fig. 7
Fig. 9
Fig. 8
6
7
Slide the stair brackets onto the rails (Fig. 7) and place rail
section between your posts (Fig. 8).
a. Mark all bracket holes. Pre-drill all bracket holes with
1
⁄8" drill bit
(Fig. 9).
b. Drive screws through brackets into post using #10 x 1
1
⁄2"
self-tapping square drive screws (4 per bracket) (Fig. 9).
Fig. 10
8
Install side bracket screws and covers
For each installed bracket, pre-drill in the center of each
elongated hole with a
1
⁄8" drill bit (Fig. 10).
NOTE:
In some cases you will be drilling though aluminum as well
as the vinyl railing.