Installation Guide

3.2.
4.
Align and connect two quarters in
place around post (fig.3), and com-
press for a snug fit.
Remove the assembled half and set
safely aside.
Align and connect the remaining two
quarters (fig.4), but DO NOT COM-
PRESS — leave roughly 1/4".
Put the first assembled half into po-
sition and clamp in place (fig.5).
Align the channels and ribs of the
second half to the first and compress
until all four sides are equal in width
(fig.5&6).
(fig.6)
(fig.5)
(fig.4)
(fig.3)