Bone Conduction Bluetooth Headset Operating Instruction 1. Power button 2. Volume button 3. Charging port /USB interface 4. Multi-function button 5.
Free your ears to listen to outside sounds and conversations while enjoying music.The best choice for listening to music, answering phones, playing games, studying, running, cycling, fitness, swimming and driving. Power on: Hold the power button for 3 seconds and the blue light will be on for 3 seconds. Prompt reads “Bluetooth Mode” in English; Power off: Hold the power button for 5 seconds. After the red light flashes, power off.
Volume up/down: Click the button then the volume will increase. When the volume is turned to the maximum, it will loop back to the minimum volume.You can also adjust the volume on your phone, iPad, or computer. Last: In music state, hold the volume button for 2 seconds to play the last song; Next: In music state, hold the multi-function button for 2 seconds to play the next song; Charging status: 1.When the headset is charged by using the SV charging stand, it is turned off and cannot be started-up.
.The LED light is red when charging, and the red light is always on. 5.Specification of the charger: Output voltage: DC5V+/-0.25V, Output current :100mA-250mA Local playback switch: double-click multi-function button in bluetooth connection state. The Chinese and English prompt sound means the switch is successful. SD card features: 1. Bluetooth is the default mode. Keep the bluetooth connected when changing SD card in any state.Switch the phone call to bluetooth if any. 2.
bluetooth search will stop in 1 minute. Chargers and Batteries Before using any charger to charge this headset, please check whether the specification of the charger meets the requirements. It is recommended that the output voltage of the charger is DC5V+/-0.25V, and the output current is 100mA-250mA. If the charging voltage is too high, the bluetooth headset may be damaged. Warning: Only certified charger can be used.
Important Safety Instructions The correct position for wearing the speaker of this device is the cheek bone in front of the ear. Do not put the speaker in the ear. Listening to loud music for a long time may cause discomfort. Please try to use a medium volume to avoid using loud music for a long time. Regardless of the volume, the use of headsets will affect your perception of the surrounding environment. Be careful when using headsets. Do not throw, hold down or immerse the headset in water.
swallowing, and when not in use, the headsets should be stored in a covered charging case and kept away from children and pets. · To avoid hearing loss, please use the headsets at a comfortable and moderate volume. · Turn down the volume first, put on the headsets, then gradually turn up the volume until you reach a comfortable listening level. · If talking through this headset while driving, use it with caution and comply with applicable laws regarding the use of mobile phones and headsets.
· Do not make the equipment and its accessories subjected to strong impact or move in order to avoid damage to the equipment and its accessories resulting in battery explosion or equipment failure. · Please use a clean, dry and soft cloth to wipe the equipment. Please stop using the equipment before cleaning and maintenance. · Do not use external heating equipment such as microwave oven or hair dryer to dry it. Wear headsets at the back of neck and speakers on both sides of cheek bones for comfort.
Please keep at least 15cm away from the implanted medical device (e.g. pacer, implanted earwa, etc.) when using this product. The radio waves generated by the device may affect the normal operation of implantable medical devices or personal medical devices, such as pacemakers and implants ears, hearing AIDS, etc. Please consult with manufacturers about the restrictions on using this product if you use any of these medical devices.
Do not wrap, seal, cover towels or place other items on the equipment. Do not use the equipment when it is placed a closed environment like boxes, etc.. You should take basic preventive measures when using this product, the specific contents are as follows: Please read all the instructions before using the charging case: - If a charging box is used near a child, it must be closely monitored to prevent injury. -The charging box must not touch water, rain, liquid or snow and other substances like this.
- Only qualified maintenance personnel can use the same spare parts to perform maintenance operations · Do not modify the product without authorization. · Contained accessories may cause asphyxia. Not suitable for children under 3 years of age. - Only use this product under the condition of power supply (such as UL, CSA VDE, CCC) which has been approved by relevant authorities and meets local regulatory requirements. · Do not overheat products containing batteries (e.g.
This form is prepared in accordance with SJ/T11364. O: means that the content of the hazardous substance in all homogeneous materials of the part is below the limit requirements stipulated by GB/T26572 X: means that the content of the hazardous substance in at least one homogeneous material of the part exceeds the limit requirements specified by GB/T26572 but there is no mature alternative program in the industry at present, which meets the EU RoHS quality and environmental protection requirements.
enjoy free maintenance service.The warranty period covers 12 months from the date of purchase. 2.
FCC Caution This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.