Specifications
Table Of Contents
- Copyright
- Compliance statements
- Contents
- Introduction
- Models and features
- Setting up your scanner
- Operating the scanner
- Maintaining your scanner
- Troubleshooting
- EC9600i network scanner dashboard
- Specifications
- Warranty Information
EC9100i and EC9600i Series Scanner User Guide Models and features
©2016 RDM Corporation Page 17
Connection ports
EC9100i
EC9600i
Note: Not all scanner models include every item shown in the diagrams.
Connector Description
USB hub
(Auto-feed models only)
You can use these ports to connect peripheral devices.
Note: You cannot connect the scanner to your computer with these ports.
USB High-speed 2.0 (480 Mb/s). Use this port to connect to a computer. You
must use the USB A to B cable.
Power Connect the power adapter to this port.
K-Slot The K-Slot or Kensington® Security Lock lets you secure the unit with a cable
(not provided) that locks into the slot. Cables can be purchased from your
local computer supply store.
Ethernet
(EC9600i only)
Use these ports to connect the scanner to your network with an Ethernet
cable.
EC9603f, EC9604f, EC9607f, and EC9608f scanners include a two-port
Ethernet hub.
EC9611f and EC9612f scanners have one Ethernet port.
USB hub
USB
Power
K-slot
USB
Power
Ethernet
Ethernet
USB hub