Specifications

Table Of Contents

EC9100i and EC9600i Series Scanner User Guide Maintaining your scanner

At the back of the scanner, above the franker cartridge, you can see the top of the inkjet blotter,

as shown below:

2. With your finger or tweezers, remove the inkjet blotter from its slot.

3. Dispose of the used blotter.

4. Insert the replacement inkjet blotter into the slot.

Replacing the paper roll for the printer

If your scanner has a printer, the following steps describe how to replace the paper roll.

1. Press the printer door release button and completely open the printer door.

2. Remove the empty paper roll from the paper compartment.

3. Insert the new paper roll into the compartment, with the end of the paper roll rolling from the

top.

4. Pull the paper out of the compartment and close the printer door so that the end of the paper

sticks out of the compartment (as pictured). Push the door closed in the center of the printer

door.

Make sure the cover is completely closed. If you push the cover from the sides, the cover might

not close completely. When closed correctly, both sides of the printer cover are flush with the

scanner.

5. Rip off any access paper sticking out of the printer cover.