SERIES 800.4 3000.1 5000.
Congratulations on your selection of a RE Audio series amplifier. We take pride in manufacturing our products and you can expect your new amplifier to give you years of trouble-free service. To make your installation as easy and reliable as possible, please read this manual carefully before beginning. If you need more information, your RE Audio Dealer will be glad to help. To locate a RE Audio Dealer near you, go to our web site and look for “Locate Dealer”.
Caution ! Jump starting your vehicle can cause large voltage spikes within your automobile’s electrical system. To prevent damage to your stereo system, make sure the entire system is shut down until full battery charge has been reached and jumper cables have been removed from the battery. We want you listening for a lifetime! Used wisely, you new will provide a lifetime of fun and enjoyment.
WIRING INSTRUCTIONS Power Connection The battery terminal(+12V) must be connected directly to the positive terminal of the vehicle’s battery to provide an adequate voltage source and minimize noise. Connecting the battery terminal lead to any other point(such as the fuse block) will reduce the power output and may cause noise and distortion. Use only 8 AWG or thicker(smaller AWG) wire for this lead and connect it to the terminal of the battery after all other wiring is completed.
7 (W)9.45/240 x (H)2.
CONNECTIONS CONNECTIONS [Basic Wiring] [Bridged Wiring] 4-channel [ZTX² 800.4] Amplifiers 4-channel [ZTX² 800.4] Amplifiers RCA Connection RCA Connection Ch2 Ch1 Ch3 Ch4 (Y-adapter) from OUTPUT of HEAD UNIT HI INPUT from OUTPUT of HEAD UNIT HI INPUT Power & Speaker Connection Impedance: 2~4Ω Power & Speaker Connection Impedance: 4~8Ω 800.4 800.