Instructions / Assembly

*according to floor design
WOOD FLOOR
JOIST
ULTRAFLECT
RADIANT
HEAT SYSTEM
SUB-FLOOR
FLOORING*
14
6 - PLUMBING & HVAC
6.5 Radiant Floor:
In Concrete Floor
1. Unroll Reective Air over the sand
or gravel.
2. Butt, or overlap the seams.
3. Seal the seams with a vapor
barrier tape.
4. Install radiant heating and then pour
concrete as usual.
6.6 Radiant Floor:
Under or Between Wood Joists
1. Unroll and staple Reective Air under
oor joists.
2. Staple Reective Air to the bottom of
the oor joists, overlapping by at
least 1/2”.
6.7 Radiant Floor:
Over Wood or Existing Floor
1. Unroll Reective Air over existing
wood oor.
2. Butt the seams.
3. Seal the seams with vapor barrier tape.
4. Install radiant heating as usual.
FLOORING*
CONCRETE
SOIL
RADIANT HEAT
SYSTEM
Reflective Air
*according to floor design
*according to floor design
WOOD FLOOR
JOIST
ULTRAFLECT
RADIANT
HEAT SYSTEM
SUB-FLOOR
FLOORING*
FLOORING*
SUBFLOOR
WOOD FLOOR
JOISTS
RADIANT HEAT
SYSTEM
ULTRAFLECT
*according to floor design
FLOORING*
CONCRETE
SOIL
RADIANT HEAT
SYSTEM
ULTRAFLECT
*according to floor design
*according to floor design
WOOD FLOOR
JOIST
RADIANT
HEAT SYSTEM
SUB-FLOOR
FLOORING*
FLOORING*
SUBFLOOR
WOOD FLOOR
JOISTS
RADIANT HEAT
SYSTEM
ULTRAFLECT
*according to floor design
FLOORING*
CONCRETE
SOIL
RADIANT HEAT
SYSTEM
ULTRAFLECT
*according to floor design
FLOORING*
SUBFLOOR
WOOD FLOOR
JOISTS
RADIANT HEAT
SYSTEM
*according to floor design
Reflective Air
Reflective Air