User Manual

100*120mm
ALARM CLOCK
USER MANUAL
Features
Alarm Setting
Automatic off Timer Wireless charging USB Phone Charging Port
• FM Radio 87.5-108 MHz
• 5W Wireless Charging
• 5V/1A USB Charging Port
• 2 Alarm Sounds Available: Radio, Buzzer
• 9 Minutes Snooze
• Sleep Timer: Radio Auto-off Timer
• 6-Level Display Dimmer
• 0-30 Level Volume Adjustable
• 12 Hour/24 Hour Time Display Format
• 1 Alarm Setting
• 99 FM Pre-Stored Stations
• FM Auto-Search Station
• FM Semi-Manual Search Station
• Pre-Stored Radio Stations Manually
RADIO
BUZZER
SNOOZE
RADIO
SLEEP
AM
PM
RADIO
BUZZER
SNOOZE
RADIO
SLEEP
AM
PM
Catalog
We, at Reacher, thank you for your purchase. The utmost care has
gone into the design and manufacturing of your clock. Please read
the following instructions and keep this User Manual in a safe
place, for future reference.
We made an instructional video on YouTube (you can find the link
below) and QR code; you only need to scan the code or enter the
video link and you will be able to access the intuitive operation of
the alarm clock radio.
Instructional Video
https://youtu.be/WgVje4Y0oWc
TIME SET: Enter the time setting
SET ON/OFF: Enter the alarm setting/Turn ON/OFF the alarm
SLEEP TIMER
Snooze/Dimmer
SET-: Adjust the Time / Alarm / Radio Channel / Time Display Format
SET+: Adjust the Time / Alarm / Radio Channel / Time Display Format
RADIO ON/OFF/SCAN (Long Press)
WIRELESS CHARGING INDICATOR:
Light up = Charging Your Device
Flashes = Charging Error
13
14
15
16
17
18
19
13
14
15
16
17
18
19
VOL+: Increase the volume
VOL-: Reduce the volume
USB CHARGING PORT
DC IN
8
8
Battery Component: Install 2 AAA batteries to save all settings
20
20
9
1
1
2
2
3
3
4
4
12 5
5
6 7
9
10
10
11
11
Blink
1. The default TIME is 12:00 AM
2. The default ALARM is 7:00 AM
1. Press the “TIME SET” button to enter the time setting, press the “SET-”
or “SET+” button to set the hour.
2. Press the “TIME SET” button to confirm the hour setting and enter the
minute setting. Press the “SET-” or “SET+” button to set the minute.
Note:
1. Long press “SET-” or “SET+” button for quick adjustment.
2. If you select the time display format mode 12H, the “PM” indicator will
appear in the afternoon, the “AM” indicator will appear in the morning.
3. If you select the time display format 12H, please make sure you choose
the correct setting, AM/PM.
If you select the time display format 12H, please make sure you choose the
correct setting, AM/PM.
Note:
Note:
When you select the alarm sound, if there is no other operation, the alarm
sound will last for 10 seconds and then exit the alarm setting.
1. Press “VOL+” or “VOL-” button to adjust the alarm volume, 5-30 levels
are adjustable.
2. Long press “VOL+” or “VOL-” for quick adjustment.
3. When you adjust the volume, you can listen for 5 seconds to confirm
whether the volume is at the preferred level.
Note:
You can adjust and save the alarm volume in any mode except radio
mode.
Note:
Appear when the radio is on
Auto-Search the channels
Appear when the radio is on
Blink
1 2
TOP PANEL FRONT PANEL
3
RADIO INDICATOR: Light on=The Alarm Sound is Radio
BUZZER INDICATOR: Light on= The Alarm Sound is Buzzer
SNOOZE INDICATOR
RADIO INDICATOR: Light on=The Radio is Turned on
SLEEP INDICATOR: Light on=The Sleep Timer is on
AM INDICATOR: Light on=AM
PM INDICATOR: Light on=PM
Plug the adapter into a standard household outlet to get the clock working.
Insert two (2) new “AAA” batteries (not included) to preserve all settings in
case of power interruption.
6
7
12
4
BACK PANEL
BOTTOM PANEL
Alarm Volume Adjustment
1. Press and hold the “ SET ON/OFF” button for 2 seconds to
turn on/off the alarm.
2. When the alarm is turned on, the corresponding indicator
(RADIO/ BUZZER) will be light up. The alarm will go off on the set alarm
time.
3. When the alarm is turned off, the corresponding indicator
(RADIO/ BUZZER) will not appear. The alarm will not go off.
Turn on/off Alarm
5
VOL+
VOL-
VOL-
VOL+
2020-02-17
YM-186F SILK
VOL+
VOL-
VOL-
VOL+
2020-02-17
YM-186F SILK
Getting Started
Time Setting
6
3. Press the “TIME SET” button to confirm the minute setting and enter the
time display format setting (12h/24h).
4. Press the “SET-” or “SET+” button to select the time display format:
24h: Military time
12h: 12-hour clock
1. Press the “ SET ON/OFF” button to enter the alarm setting, press the
“SET-” or “SET+” button to set the hour.
3. Press the “ SET ON/OFF” button to confirm the minute setting and
enter the alarm sound setting.
4. Press the “SET-” or “SET+” button to select the alarm sound:
BUZ: The alarm sound is buzzer and the “BUZZER” indicator will light up
5. Press the “ SET ON/OFF” button to confirm and exit the alarm setting.
2. Press the “ SET ON/OFF” button to confirm the hour setting and
enter the minute setting. Press the “SET-” or “SET+” button to set the
minute.
1. When the radio turns on, short press the “SLEEP TIMER” button to
enable the automatic off timer. The “SLEEP” indicator and the sleep
time will appear (The default sleep time is 5 minutes with “05” on the
LED display).
Place your phone in the "WIRELESS CHARGER" position and the top
panel indicator will light up if the phone has been placed correctly. When
fully charged, the light will go out.
USB charging port for charging your mobile phone.
Battery Backup
The battery will maintain all settings if the power is interrupted. There will
be no display and the ALARM will not sound under battery power. If there
is no battery and the power is interrupted, the ALARM/TIME/RADIO will
need to be reset.
Care of Your Clock
Replace the backup battery annually or store the clock without a battery
when not in use. A soft cloth or a paper towel may be used to clean your
clock. Do not use any corrosive cleaner or chemical solutions on the clock.
Keep the clock clean and dry to avoid problems.
Support
Contact [e-mail]. We will respond to your email
within 24 hours.
2. By pressing again the “SLEEP TIMER” button to cycle select 5, 30, 45,
60, 75, 90, 105, 120 minutes or OFF. (“OFF” means the timer is disabled.)
5. Press the “TIME SET” button to confirm and exit the time setting.
Light up
Indicator
Select timer time
Blink
RAD
7
15 16 17
8 9 10 11
1. When the alarm goes off, press any top panel button except the
"SNOOZE/ DIMMER" button to stop the alarm. It will ring the next day at
the same time.
2. If there is no other operation, the alarm will stop after 30 minutes.
Stop Alarm
Manually Search FM Channel
1. Short press the "RADIO ON / OFF / SCAN (long press)" button to turn
on the radio.
2. Press and hold the "SET-/SET+" button for 2 seconds to search the
channel, when a radio station is found, stop searching and play the
searched radio channel.
Radio Memory
The clock radio can save up to 99 radio stations, allowing for quick access.
1. Press and hold the "SLEEP TIMER" button for 2 seconds until “P01”
flashes. Press the “SLEEP TIMER” button again to store the Station 1.
Play the Pre-Stored Stations
In radio mode, short press the SET-/SET+" button once to select the radio
station from the list.
Radio Volume Adjustment
1. Press the “VOL+” or “VOL-” button to adjust the radio volume, 0-30
levels are adjustable.
2. Long press the “VOL+” or “VOL-” for quick adjustment.
2. Search the second desired station, long-press the “SLEEP TIMER”
button until “P01” flashes. Then, press the “SET+” button, when “P02”
appears and flashed, press the “SLEEP TIMER” button once again to
store the Station 2.
3. Repeat the above procedure to store more radio stations.
AUTO Search FM Channel
1. Press and hold the "RADIO ON / OFF / SCAN (long press)" button for 2
seconds to turn on the radio.
2. It will automatically start searching for radio stations from 87.5MHz to
108MHz. The searched radio channels will be stored automatically; up
to 99 channels can be stored.
12 13 14
RADIO
BUZZER
SNOOZE
RADIO
SLEEP
AM
PM
Blink
RADIO
BUZZER
SNOOZE
RADIO
SLEEP
AM
PM
RADIO
BUZZER
SNOOZE
RADIO
SLEEP
AM
PM
RADIO
BUZZER
SNOOZE
RADIO
SLEEP
AM
PM
Blink
RADIO
BUZZER
SNOOZE
RADIO
SLEEP
AM
PM
RADIO
BUZZER
SNOOZE
RADIO
SLEEP
AM
PM
RADIO
BUZZER
SNOOZE
RADIO
SLEEP
AM
PM
BUZ
RADIO
BUZZER
SNOOZE
RADIO
SLEEP
AM
PM
RADIO
BUZZER
SNOOZE
RADIO
SLEEP
AM
PM
RADIO
BUZZER
SNOOZE
RADIO
SLEEP
AM
PM
RADIO
BUZZER
SNOOZE
RADIO
SLEEP
AM
PM
1. Instructional Video ....................................................................
2. Features ..................................................................................
3. Getting Started ..........................................................................
4. Product View ...........................................................................
5. Time Setting ............................................................................
6. Alarm Setting ...........................................................................
1) Alarm Volume Adjustment ..............................................................
2) Turn ON/OFF Alarm ......................................................................
3) Stop Alarm .....................................................................................
7. SNOOZE ................................................................................
8. FM Radio Feature ..................................................................
1)
Set up FM antenna ........................................................................
2) AUTO Search FM Channel ...........................................................
3) Manually Search FM Channel ......................................................
4) Radio Memory ..............................................................................
5) Play the Pre-Stored Stations ........................................................
6) Radio Volume Adjustment ............................................................
7) Automatic off Timer ......................................................................
9. Using the Dimmer .................................................................
10. Wireless Charging ...............................................................
11. USB Phone Charging Port ...................................................
12. Battery Backup ....................................................................
13. Care of Your Clock ...............................................................
14. Support ................................................................................
1
2
2
3
6
8
11
11
11
12
12
12
13
13
14
14
14
15
15
16
17
17
17
17
FM Antenna
ACR-W
Light out = No Device Charging
YM-186
The corresponding ringtone indicator
will light up
RAD: The alarm sound is the radio
and the “RADIO” indicator will light up
Note:
The default alarm sound is ra
dio, 87.5MHz. If you choose the radio as the
alarm sound, the last channe
l you listen to will be the ringtone
.
SNOOZE
When the alarm goes o
ff, you can press the “
SNOOZE/
DIMME
R” button to
snooze for a while.
After 9 minutes, the alarm wi
ll go o
ff again.
1.
The alarm can snooze 6 time
s.
After the seventh snooze, the
alarm will
go silent.
2. If no action is taken when
the alarm goes off, the alarm will stop after 30
minutes.
FM Radio Feature
Set up FM antenna
Extend the FM wire antenna fully and vary the direction for the best FM
reception.
Using the Dim
mer
Press the “
SNOOZE/
DIMME
R
” button to se
t the display brightness to
Bright/30% Dim
/50% Dim/75% Dim/90% Di
m/OFF.
Note:
When the alarm
is triggered, this button pla
ys the role of “snooze” instea
d
of “dimm
er”.
Made in China