User manual

2.2 Adding Adapter C to existing Network AB (Network ABC)
One unassociated Adapter C is added to an existing Network AB.
The procedure is as follows:
1. Press and hold the Security button on Adapter C for 10 seconds. Release it when the Power light flashes. The
password to Adapter C has just been erased. It must now be linked to your network to adopt the new network
security key.
2. Press and hold the security button on Adapter A for 2 seconds. The Power light on Adapter A starts to flash.
3. Within 120 seconds after the Power light on Adapter A starts to flash, press and hold the security button on
Adapter C for 2 seconds then release.
4. Adapter A, Adapter B and Adapter C are now networked to each other.
2.3 Removing Adapter B from Adapter A & C Network and join with Adapter
D & E (Network BDE)