MSDS

ManualsBrandsREADY SEAL ManualsPaint1-gal. Golden Pine Exterior Wood Stain and Sealer

COMPANY IDENTITY: READY SEAL, INCORPORATED DATE: 09/20/2013

PRODUCT IDENTITY: READY SEAL WOOD STAIN PAGE: 1 OF 8

MATERIAL SAFETY DATA SHEET

This Material Safety Data Sheet conforms to the requirements of ANSI Z400.1.

THIS MSDS COMPLIES WITH 29 CFR 1910.1200 (HAZARD COMMUNICATION STANDARD)

IMPORTANT: Read this MSDS before handling & disposing of this product.

Pass this information on to employees, customers, & users of this product.

SECTION 1 - IDENTIFICATION OF THE SUBSTANCE OR MIXTURE AND OF THE SUPPLIER

PRODUCT IDENTITY: READY SEAL WOOD STAIN

NEW MSDS DATE: 04/04/2013

COMPANY IDENTITY: READY SEAL INCORPORATED

COMPANY ADDRESS: 1440 SOUTH STATE HIGHWAY 121, SUITE 3

COMPANY CITY: LEWISVILLE, TX 75067

COMPANY PHONE: 1-972-434-2028

EMERGENCY PHONES: CHEMTREC: 1-800-424-9300

SECTION 2 - HAZARDS IDENTIFICATION

CAUTION

RISK STATEMENTS:

R36/38 Irritating to eyes, respiratory system and skin.

SAFETY STATEMENTS:

S24/25 Avoid contact with skin and eyes.

S36/37/39 Wear suitable protective clothing, gloves and eye/face protection.

SECTION 3 - COMPOSITION/INFORMATION ON INGREDIENTS

MATERIAL CAS# EINECS# WT%

Mineral Oil - - 100

containing:

Distillates, solvent refined

Light 64742-48-9 - < 10

Distillates, solvent refined

Heavy 64742-47-8 - < 10

Distillates, severely hydrotreated

Heavy 64742-53-6 - < 70

Proprietary - - > 10

Trace components: Trace ingredients (if any) are present in < 1% concentration, (< 0.1% for potential carcinogens,

reproductive toxins, respiratory tract mutagens and sensitizers). None of the trace ingredients contribute significant

additional hazards at the concentrations that may be present in this product. All pertinent hazard information has been

provided in this document, per the requirements of the Federal Occupational Safety and Health Administration Standard

(29 CFR 1910.1200), U.S. State equivalents and Canadian Hazardous Materials Identification System Standard (CPR 4).

SEE SECTIONS 8, 11 & 12 FOR TOXICOLOGICAL INFORMATION

Summary of content (8 pages)

PAGE 1
COMPANY IDENTITY: READY SEAL, INCORPORATED PRODUCT IDENTITY: READY SEAL WOOD STAIN DATE: 09/20/2013 PAGE: 1 OF 8 MATERIAL SAFETY DATA SHEET This Material Safety Data Sheet conforms to the requirements of ANSI Z400.1. THIS MSDS COMPLIES WITH 29 CFR 1910.1200 (HAZARD COMMUNICATION STANDARD) IMPORTANT: Read this MSDS before handling & disposing of this product. Pass this information on to employees, customers, & users of this product.
PAGE 2
COMPANY IDENTITY: READY SEAL, INCORPORATED PRODUCT IDENTITY: READY SEAL WOOD STAIN DATE: 09/20/2013 PAGE: 2 OF 8 SECTION 4 - FIRST AID MEASURES EYE CONTACT: If this product enters the eyes, open eyes while under gently running water. Use sufficient force to open eyelids. “Roll” eyes to expose more surfaces. Minimum flushing is for 15 minutes. Seek immediate medical attention. SKIN CONTACT: If the product contaminates the skin, immediately begin decontamination with running water.
PAGE 3
COMPANY IDENTITY: READY SEAL, INCORPORATED PRODUCT IDENTITY: READY SEAL WOOD STAIN DATE: 09/20/2013 PAGE: 3 OF 8 SECTION 6 - ACCIDENTAL RELEASE MEASURES SPILL AND LEAK RESPONSE AND ENVIRONMENTAL PRECAUTIONS: Uncontrolled releases should be responded to by trained personnel using pre-planned procedures. Proper protective equipment should be used. In case of a spill, clear the affected area, protect people and respond with trained personnel.
PAGE 4
COMPANY IDENTITY: READY SEAL, INCORPORATED PRODUCT IDENTITY: READY SEAL WOOD STAIN DATE: 09/20/2013 PAGE: 4 OF 8 SECTION 7 - HANDLING AND STORAGE (CONTINUED) TANK CAR SHIPMENTS Tank cars carrying this product should be leaded and unladed in strict accordance with tank-car manufacturer’s recommendation and all established on-site safety procedures. Appropriate personal protective equipment must be used (see Section 8, Engineering Controls and Personal Protective Equipment).
PAGE 5
COMPANY IDENTITY: READY SEAL, INCORPORATED PRODUCT IDENTITY: READY SEAL WOOD STAIN DATE: 09/20/2013 PAGE: 5 OF 8 SECTION 8 - EXPOSURE CONTROLS / PERSONAL PROTECTION (CONTINUED) BODY PROTECTION Use body protection appropriate for task. Cover-all, rubber aprons or chemical protective clothing made from impervious materials are generally acceptable, depending on the task. WORK & HYGIENIC PRACTICES: Provide readily accessible eye wash stations & safety showers.
PAGE 6
COMPANY IDENTITY: READY SEAL, INCORPORATED PRODUCT IDENTITY: READY SEAL WOOD STAIN DATE: 09/20/2013 PAGE: 6 OF 8 SECTION 11 - TOXICOLOGICAL INFORMATION ACUTE HAZARDS EYE & SKIN CONTACT: Primary irritation to skin, defatting, dermatitis. Primary irritation to eyes, redness, tearing, blurred vision. Liquid can cause eye irritation. Wash thoroughly after handling. INHALATION: Vapor harmful. SWALLOWING: Swallowing can cause abdominal irritation, nausea, vomiting & diarrhea.
PAGE 7
COMPANY IDENTITY: READY SEAL, INCORPORATED PRODUCT IDENTITY: READY SEAL WOOD STAIN DATE: 09/20/2013 PAGE: 7 OF 8 SECTION 12 - ECOLOGICAL INFORMATION ALL WORK PRACTICES MUST BE AIMED AT ELIMINATING ENVIRONMENTAL CONTAMINATION. EFFECT OF MATERIAL ON PLANTS OR ANIMALS This product may be harmful or fatal to plant and animal life if released into the environment. Refer to Section 11 (Toxicological Information) for further data on the effects of this product’s components on test animals.
PAGE 8
COMPANY IDENTITY: READY SEAL, INCORPORATED PRODUCT IDENTITY: READY SEAL WOOD STAIN DATE: 09/20/2013 PAGE: 8 OF 8 SECTION 16 - OTHER INFORMATION HAZARD RATINGS HEALTH (NFPA): 1, HEALTH (HMIS): 1, FLAMMABILITY: 1, REACTIVITY: 0 (Personal Protection Rating to be supplied by user based on use conditions.) This information is intended solely for the use of individuals trained in the NFPA & HMIS hazard rating systems. EMPLOYEE TRAINING See Section 2 for Risk & Safety Statements.