User Manual

ReadyLift
®
(Part# 66-5251) Strut Extension, Installation Instructions
2012-2014Toyota Tundra 4WD 3” Lift
ReadyLift Suspension Inc.
Toll Free [phone]
After ReadyLift® Before ReadyLift®
Wheel Alignment: A Certified Alignment Technician that is experienced with lifted vehicles is recom-
mended to perform the alignment.
*It is also recommended that you adjust your headlights whenever your vehicle’s ride height is altered.
*Steering and Yaw sensors in the new Tundra are very sensitive, so after any suspension change
the alignment has to be brought back into factory specs. A “Zero point Calibration” is done after
the alignment to re-set the on-board computer. If these are not done, the truck may trigger traction
control under heavy throttle or load causing the engine to lose some power or the brakes applied.
The typical cost to have a Toyota dealer do these two critical adjustments is around $125.
Warning! This ReadyLift
®
66-5951 front lift kit is designed and engineered to lift a
stock vehicle with no prior modifications. The use of this kit along with items such
as rear lift blocks or spacers, add-a-leafs, airbags, suspension lifts, body lifts or any
other type of lifting accessory shall be done at the vehicle owners risk and will void
any and all warranties in effect or implied by ReadyLift
®
.
Installation Warning
Always wear proper safety equipment and use the
correct tools when installing any suspension up-
grade. Make sure vehicle is on a flat surface and
you are using jack stands or a lift rated for the
weight of the vehicle.
Vehicle Handling Warning
Vehicles with larger wheels and tires will handle
differently than stock vehicles.
Take time to familiarize yourself with the handling
of your vehicle.
DRIVE SAFELY & WEAR YOUR SEATBELT.