User Manual

www.ReadyLIFT.com
Phone [phone]
Installation Steps (69-2011, 2511, 2511TP, 2531, 2535, 2537, 2538)
Place vehicle on level ground and measure ride height. Remove upper trac bar hardware and disconnect at frame.
Lift front of vehicle and support with min. 3 ton jack stands. Remove front wheels and tires.
(05-07) models remove brake line brackets at the frame Install drop bracket and attach to frame with OE hardware.
(08-10) models require drilling new 3/8 hole below OE hole. Shown, pass. side new 3/8 brake line hole location.
Drill 3/8 hole
and flatten tab
OE holes