User Manual

www.ReadyLIFT.com
Phone [phone]
Installation Steps (69-2011, 2511, 2511TP, 2531, 2535, 2537, 2538)
Remove bump stop and unbolt bracket from frame. Assemble bump stop bracket to extension and reinstall.
Reinstall wheels/tires, lower vehicle and torque to spec. .(05-10) Re-attach and tighten sway bar end links.
Re-attach trac bar to frame mount and torque to spec. Optional trac bar bracket; Remove mounting hardware (5)
Install new bracket with factory hardware and torque to spec. (05-10) Install fender liner strap to clear larger wheel/tires
(3) nuts on cross-
member (2) bolts
Shows (3)
mounting points
on cross-member