User Manual

www.ReadyLIFT.com - Phone: [phone]
Installation Instructions 69-5112
3
TheBillofMaterialsrepresentsthecomponentcontentsofthiskit.Allhardwareisofthe
highestgradeandthecomponentsaremanufacturedtoexactingspecificationsfora
troublefreeinstallation.Usetheattachedtorquespecificationschartwhenfinaltighten‐
ingofthenutandboltsaredone.
Bill of Materials
Description Qty
FrontStrutExtension 2
SkidPlateSpacerKit(Packaged) 1

M10FlangeNuts 6
FrontDiffDropKit(Packaged) 1
Description Qty
FrontSwayBarDropSpacers 2
M10‐1.25x20mmBoltw/washer 4
1”RearLiftBlocks 2
U Bolts- 14mm x 210mm, square
4
14mmNutsandWashers 8
1. Remove the skid plate by unbolting the four 12mm
bolts that hold it on.
2. Starting from the passenger side, loosen the upper
and lower strut mount nuts.
3. Loosen, don’t remove the 19mm lower control arm
nut and bolt, Remove the 19mm lower ball joint bolts.
4. Remove the lower strut mount nut and bolt. Push the
lower control arm down.
Lower Ball joint