User Manual

www.ReadyLIFT.com - Phone: [phone]
Installation Instructions 69-5112
5
SKID PLATE SPACER INSTRUCTIONS
Using the hardware provided, install the M8 bolt, washer, skid plate, and 1/2 tall spacer
into the back two skid plate mounting points. Use the OEM hardware for the two front
mounting parts.
SWAY BAR SPACER INSTRUCTIONS
4. Install sway bar saddle brackets
reusing the factory hardware.
5. Repeat for the other side and
torque all bolts.
6. Sway bar spacer properly installed.
1. Remove the sway bar from the
frame on both sides. Remove the
metal saddle and leave the bushing.
2. Install aluminum spacer to the
frame using the hardware supplied.
Note the position of the holes.
3. Repeat for the other side and
torque bolts.