User Manual

ReadyLIFT
®
(Part# 66-7816A) Instructions
Torsion Bar Unloading Tool
ReadyLIFT Suspension Inc.
7490 Commercial Way, Henderson, NV 89011
Phone [phone] Fax [phone]
NOTE: GREASE BEFORE USE! Completely remove the threaded bolt
and thoroughly grease the inside threads of the tool with high quality
Black or Red Molybdenum lubricant. Repeat as needed, and remove all
metal shavings from the tool threads before re-greasing. Flange nuts
must be seated properly in cross-shaft to prevent damage to tool.
Cross member adapter Cross member adapter w/tool
Cross-shaft
Flange nuts
Ford Ranger
only