Instructions / Assembly

5
Assembly and Use
a b
3
Check to make sure there is no debris
in the head of the LP gas tank or in the
head of the regulator valve. Make sure you
check the burner and burner ports as well.
Connect gas line to tank by turning knob
clockwise. Hand tighten only.
Make sure the valve on the LP gas tank is
OFF.
Disconnect by turning the knob counter
clockwise until it is detached from the valve.
2.) Connecting the LP Gas Tank
Disconnecting the LP Gas Tank
a) Place the tank seat (3) on the ground and place a 20 lb. propane tank
into the tank seat.
b) Tighten down the screw on the side of the tank seat (3) to secure the
propane tank.