LOT# PO# Mantel Assembly Instructions Model # 2222 Hawthorne Fireplace
! WARNING ! Read entire label and all instructions included with fireplace fuel and fireplace PROPERTY DAMAGE, SERIOUS INJURY OR DEATH may result if these warnings are not followed HAZARDS - Fireplace fuel is flammable. Failure to follow warnings can result in property damage or serious burns. - Do not attempt to pourany kind of fuel on a fire that is already burning. Flare-ups or flashbacks can occur if you do. Allow unit to cool for 20 minutes before refueling or removing cans of fuel.
PARTS LIST 11 12 4 10 2 Number Description Box 1 includes1 Center Base Panel 6 Left Inside Panel 7 Right Inside Panel 8 Left Front Panel 9 Right Front Panel 11 Center Top Panel 18 Shelf Panel 19 Hardware Kit Box 3 includes2 Left Base Panel 3 Right Base Panel 4 Left Outside Panel 5 Right Outside Panel 10 Back Panel 12 Left Top Panel 13 Right Top Panel 14 Left Center Panel 15 Right Center Panel 16 Upper Firebox Trim 17 Center Panel 18 Shelf Panel 17 16 18 14 13 6 8 18 9 7 15 10 5 1 3 Dark
Step One - Combine center base panel (1) with left base panel (2), right base panel (3) by securing 4 long allen screws (C) through 4 washers (D). 1 2 3 D C Step Two - Screw six 3-in-1 bolts (A) to panel (11). - Screw three 3-in-1 bolts (A) to panel (2), (3), (8), (9), (12), (13) respectively. - Screw one 3-in-1 bolt (A) and insert one wooden dowel (I) to panel (4), (5) respectively. - Screw four 3-in-1 bolts (A) and insert two wooden dowels (I) to panel (6), (7) respectively.
Step Three - Join left inside panel (6) with left front panel (8) by inserting 3 bolts (A) in the holes of panel (6). Using 3 excenter fittings (B) to lock the bolts. - Repeat with right inside panel (7) an right front panel (9).. 9 8 A B 7 6 Step Four - Set left top panel (12) on a flat surface as shown. - Join left outside panel (4) by inserting 3 bolts (A) in the holes of panel (4). Using 3 excenter fittings (B) to lock the bolts.
Step Five - Join left inside panel (6) with left top panel (12), left center panel (14) by inserting 4 bolts (A) and 2 dowels (I) in the holes of panel (12), (14). Using 4 excenter fittings (B) to lock the bolts. - Repeat with panel (7), (13), (15). 7 6 B 15 13 A 14 I 12 Step Six - Set base panel (1) & (2) & (3) on a flat surface as shown. - Locate above finished parts to base panel. - Join outside panel (4), (5) by inserting 6 bolts (A) in the holes of panel (4), (5).
Step Seven. - Attach upper firebox trim (16) to front panel (8), (9) by securing 2 long allen screws (C) through 2 washers (D). D 17 16 C 9 8 Step Eight - Locate center top panel (11) to above finished center parts. - Join inside panel (6), (7) by inserting 6 bolts (A) in the holes of panel (6), (7). Using 6 excenter fittings (B) to lock the bolts.
Step Nine -Insert 4 shelf panel support (G) to the holes of the panel (4), (5), (6), (7) respectively. Keep every 2 supports on parallel. -Put on four shelf panels (18) on the shelf panel supports. G 18 18 18 18 Step Ten -Attach two back panels (10) to above finish parts by securing 32 back panel screws (F).
Step Eleven For next step reference the instruction manual included with your firebox. If you do not have an instruction manual included with your firebox do not attempt to assemble or operate. Immediately call our customer service department at 1-800-654-1704 for a replacement manual. WARNING: Do not operate your firebox without reading all instructions and warnings prior to use.
Warranty & Return Policies Warranty Jensen Metal Products, Inc., doing business as Real Flame®, warrants Real Flame vent-less fireplaces and accessories to be free from defects in parts and workmanship under normal use and service for a period of 90 days from the date of purchase. In the event of such defects Real Flame will, at its option, replace the defective product or refund the purchase price.
LOT# PO# Instructions d’assemblage du manteau de cheminée Modèle n° 2222 Foyer Hawthorne
! Avertissement! ! Lire complètement l’étiquette et toutes les instructions du combustible pour foyer sans ventilation La négligence à suivre tous ces avertissements peut occasionner des dommages à la propriété, des blessures sérieuses et même la mort DANGERS - Le combustible pour foyer sans ventilation est inflammable. La négligence à suivre les avertissements de danger peut occasionner des brûlures sérieuses, des blessures, des dommages à la propriété et même la mort.
Liste des pièces 11 12 17 16 18 14 4 10 6 8 2 N° Description La boîte 1 inclut : 1 Panneau de base central 6 Panneau intérieur gauche 7 Panneau intérieur droit 8 Panneau avant gauche 9 Panneau avant droit 11 Panneau supérieur central 18 Tablette 19 Quincaillerie La boîte 3 inclut : 2 Panneau de base gauche 3 Panneau de base droit 4 Panneau extérieur gauche 5 Panneau extérieur droit 10 Panneau arrière 12 Panneau supérieur gauche 13 Panneau supérieur droit 14 Panneau central gauche 15 Panneau central
Première étape - Relier le panneau de base central (1) avec le panneau de base gauche (2) et le panneau de base droit (3) et fixer solidement avec 4 vis Allen longues (C) et 4 rondelles (D). 1 2 3 D C Deuxième étape - Visser six boulons 3 en 1 (A) au panneau (11). - Visser trois boulons 3 en 1 (A) à chacun des panneaux (2) (3) (8) (9) (12) (13). - Visser un boulon 3 en 1 (A) et insérer un goujon de bois (I) à chacun des panneaux (4) et (5).
Troisième étape - Unir le panneau intérieur gauche (6) au panneau avant gauche (8) en insérant 3 boulons (A) dans les trous du panneau (6). Utiliser 3 écrous de blocage décentrés (B) pour bloquer les boulons. - Répéter l’opération avec le panneau intérieur droit (7) et le panneau avant droit (9). 9 8 A B 7 6 Quatrième étape - Mettre le panneau supérieur gauche (12) sur une surface plane comme illustré. - Joindre le panneau extérieur gauche (4) en insérant 3 boulons (A) dans les trous du panneau (4).
Cinquième étape - Unir le panneau intérieur gauche (6) au panneau supérieur gauche (12) et au panneau central gauche (14) en insérant 4 boulons (A) et 2 goujons de bois (I) dans les trous des panneaux (12) et (14). Utiliser 4 écrous de blocage décentrés (B) pour bloquer les boulons. - Répéter l’opération avec les panneaux (7) (13) (15). 7 6 B 12 13 A 14 I 12 Sixième étape - Mettre les panneaux de base (1) & (2) & (3) sur une surface plane comme illustré.
Septième étape - Fixer solidement la moulure supérieure du foyer (16) aux panneaux avant (8) et (9) avec 2 vis Allen longues (C) et 2 rondelles (D). D 17 16 C 9 8 Huitième étape - Déposer le panneau supérieur central (11) sur les pièces du centre déjà assemblées. - Unir les panneaux intérieurs (6) et (7) en insérant 6 boulons (A) dans les trous des panneaux (6) et (7). Utiliser 6 écrous de blocage décentrés (B) pour bloquer les boulons.
Neuvième étape - Insérer 4 supports à tablette (G) dans les trous de chacun des panneaux (4) (5) (6) (7). Chaque pair de supports doit être parallèle. - Mettre 4 tablettes (18) sur les supports à tablette. G 18 18 18 18 Dixième étape - Fixer solidement deux panneaux arrière (10) sur les pièces déjà assemblées avec 32 vis pour panneaux arrière (F).
En onze étapes Pour l’étape suivante, vous référer au manuel d’instruction inclus avec votre chambre de combustion. Si aucun manuel d’instruction n’est inclus avec votre chambre de combustion, ne pas tenter de l’assembler ou de faire fonctionner le foyer. Contacter immédiatement le service à la clientèle au 1-800-654-1704 pour recevoir un manuel de remplacement. Avertissements : Ne pas utiliser votre chambre de combustion sans avoir lu toutes les instructions et les avertissements.
GARANTIE DE REAL FLAME ET POLITIQUE DE RETOUR Garantie La compagnie Jensen Metal Products, opérant sous le nom de Real Flame, garantit les foyers sans ventilation Real Flame et ses accessoires de tout défaut (pièces et main d’œuvre) conformément à un usage courant et pour une période de 90 jours suivant la date d’achat. Dans l’éventualité de défectuosité, Real Flame remplacera, selon sa convenance, le produit défectueux ou procédera au remboursement du coût d’achat.