Instructions / Assembly

4
Step Three
Install anti-topple device on the mantel.
Note: Your mantel may vary slightly from the one depicted in this illustration.
3
Real Flame® Customer Service: 1-800-654-1704
L-Bracket
2x
2x
1x
1x
2x
A B C
D E
Long Wood Screw
Drywall Anchor Short Screw
Cable
-10032Anti-Topple Device
Anti-topple device must be installed on the fireplace. If you do not, sever
injury or damage could occur.
!
CAUTION
1
2
With a pencil, make a mark 3 inches
below the mantel top to mark the
correct mounting height of the
L-Bracket (D).
Locate a stud. Anchor the
L-Bracket (D) to the wall using
two Long Wood Screws (A). If a
stud is unavailable, use the
included Drywall Anchors (B).
Locate the threaded
insert under mantel top
and use 1 Small Screw
(C) to anchor one end
of the Cable (E).
Secure the other end of the Cable (E)
to the L-Bracket (D) using the remaining
Small Screw (C).
2x
A
1x
D
3
4
1x
C
1x
E
1x
C
3”
Studs
Maximum weight for the anti-topple device is 40 lbs.