Lot: Model # 3710 Rutherford Fireplace 3710-Rutherford-JW-090911 Mantel Assembly Instructions
Helpful Tips for Assembly IF ANY PARTS ARE DAMAGED OR MISSING PLEASE CALL US DIRECTLY AT: 1-800-654-1704 Prep, plan and clear your space. In order to minimize damage while assembling make sure unpacking and assembly takes place on a carpeted surface. We recommend to use a power screwdriver for assembly it will greatly reduce your time for assembly. BE SURE NOT TO OVERTIGHTEN SCREWS. The wood can easily be stripped out if too much force is used. Use two people for assembly of the mantle.
PARTS LIST 15 17 13 14 16 16 12 18 2 4 18 18 5 6 8 3 18 11 9 10 7 1 Number Description Dark Walnut Dark Mahogany Quantity Box 1 includes1 Base Panel 37101201 37100501 1 10 Lower Firebox Trim 37101210 37100510 1 11 Firebox Support 37100011 37100011 1 13 Center Shelf Panel 37101213 37100513 1 14 Upper Door 37101214 37100514 1 15 Top Panel 37101215 37100515 1 17 Upper Back Panel 37101217 37100517 1 19 Hardware Kit 37100019 37100019 1 Box 3 includes2 L
HARDWARE KIT A x 26 3 in 1 Bolt B x 26 Excenter C x 12 Long Allen Screw D x 10 Washer Ex1 Allen Wrench F x 34 Back Panel Screw G x 16 Shelf Panel Support Hx2 MDF Board IX2 Upper Door Hinge J x 12 Upper Door Hinge Screw Kx2 Upper Door Stopper Lx4 Side Door Hinge K1 K2 M x 24 Side Door Hinge Screw 4
Step One -Join left door (6) with left outside panel (2) by securing 12 side door hinge screws (M) through 2 side door hinges (L). -Repeat with right door (7) and right outside panel (3). M 6 2 3 L 7 Step Two -Join upper door (14) with center shelf panel (13) by securing 12 upper door hinge screws (J) through 2 upper door hinges (I). -Attach two upper door stoppers (K2) to upper door by securing 4 back panel screws (F).
Step Three -Screw eight 3-in-1 bolts (A) to base panel (1). -Screw four 3-in-1 bolts (A) to top panel (15). -Attach two upper door stoppers (K2) to top panel (15) by securing 4 back panel screws (F). A 1 A F 15 K2 Step Four -Screw six 3-in-1 bolts (A) to center shelf panel (13). -Screw four 3-in-1 bolts (A) to left inside panel (4). -Screw four 3-in-1 bolts (A) to right inside panel (5).
Step Five -Join left firebox trim (8) with left inside panel (4) by inserting three bolts in the holes of panel (8). Using 3 excenter fittings (B) to lock the bolts. -Repeat with right firebox trim (9) and right inside panel (5). 9 8 5 4 B Step Six -Set base panel (1) flat as shown. -Join panel (2)&(6), (3)&(7), (4)&(8), (5)&(9) by inserting eight bolts in the holes of (2), (3), (4), (5). Using 8 excenter fittings (B) to lock the bolts.
Step Seven -Attach lower firebox trim (10) to left (8) and right (9) firebox trim by securing 2 long allen screws (C) through 2 washers (D). -Attach upper firebox trim (12) to inside panel (4) and (5) by inserting 2 bolts in the holes of panel (12). Using 2 excenter fittings (B) to lock the bolts. Fit on left (8) and right (9) firebox trim by securing 4 long allen screws (C) through 4 washers (D) and 2 MDF boards (H). B H 12 D C 5 9 8 4 10 D C Step Eight -Locate (13) & (14) from previous steps.
Step Nine -Locate top panel (15) from step 3. -Secure top panel (15) to assembled parts by inserting 4 bolts in the holes of the two panels. Using 4 excenter fittings (B) to lock the bolts. -Attach firebox support (11) to base panel (1) by securing 2 long allen screws (C). 15 B 3 C 2 C 11 1 Step Ten -Insert 4pcs shelf panel supports (G) to the holes of panel (2), (4), (3), (5) respectively. Keep every 2 supports on parallel. - Put on 4pcs side shelf panel (18) on the shelf panel supports.
Step Eleven -Attach 2pcs side back panel (16) and 1pc upper bac k panel (17) to above finished parts by securing 26 back panel screws (F). F 17 16 16 Step Twelve For next step reference the instruction manual included with your firebox. If you do not have an instruction manual included with your firebox do not attempt to assemble or operate. Immediately call our customer service department at 1-800-654-1704 for a replacement manual.
Warranty & Return Policies Ninety-Day Warranty: Jensen Metal Products Inc. D/B/A Real Flame® warrants Real Flame vent-less fireplaces and accessories to be free from defects in parts and workmanship under normal use and service for a period of 90 days from date of shipment. In the event of such defect in parts or workmanship, Jensen will, at its option, replace the defective product or refund the purchase price to the extent of the defective product’s replacement cost.
Lot: Foyers au gel combustible et accessoires Foyer Rutherford Modèle Nº 3710 3710-Rutherford-JW-090911 Instructions d’assemblage Manteau de cheminée
Conseils pour un bon assemblage Avant l’assemblage, déballer et vérifier soigneusement toutes les pièces du foyer et de la quincaillerie. Si des pièces sont manquantes ou endommagées, veuillez nous contacter directement au 1-800-654-1704 Préparer, planifier et libérer votre espace. Afin de minimiser les dommages, procéder au déballage et à l’assemblage sur une surface recouverte d’un tapis.
Liste des pièces 15 17 13 14 16 16 12 18 2 4 18 18 5 6 8 3 18 11 9 10 7 1 Nº Description Noyer foncé Acajou foncé Quantité Encadré 1 comprend1 Panneau de base 37101201 37100501 1 10 Moulure inférieure 37101210 37100510 1 11 Support du foyer 37100011 37100011 1 13 Tablette du centre Porte supérieure 37100513 37100514 1 14 37101213 37101214 15 Panneau supérieur 37101215 37100515 1 17 Panneau supérieur arrière 37101217 37100517 1 19 Ensemble de quincaillerie 37
Ensemble de Quincaillerie 26 x A Boulon 3 en 1 26 x B Écrou de blocage décentré 12 x C Vis Allen longue 10 x D Rondelle 1xE Clé Allen 34 x F Vis pour panneau arrière 16 x G Support à tablette 2xH Plaquette de MDF 2xI Charnière pour la porte supérieure 12 x J Vis pour charnière de la porte supérieure 2xK Butoir de porte supérieure 4xL Charnière pour porte latérale K1 K2 24 x M Vis pour charnière de porte latérale 4
Première étape -Unir la porte de gauche (6) au panneau extérieur gauche (2), et immobiliser avec 12 vis pour charnière (M) à travers 2 charnières pour porte latérale (L). -Répéter la même procédure pour la porte de droite (7) et le panneau extérieur droit (3). M 6 2 3 L 7 Deuxième étape -Unir la porte supérieure (14) à la tablette du centre (13), et immobiliser avec 12 vis à charnière pour porte supérieure (J) à travers 2 charnières pour porte supérieure (I).
Troisième étape - Visser huit boulons 3 en 1 (A) au panneau de base (1). - Visser quatre boulons 3 en 1 (A) au panneau supérieur (15). - Fixer deux butoirs de porte supérieure (K2) au panneau supérieur (15), et immobiliser avec 4 vis pour panneau arrière (F). A 1 A F 15 K2 Quatrième étape - Visser six boulons 3 en 1 (A) à la tablette du centre (13). - Visser quatre boulons 3 en 1 (A) au panneau intérieur gauche (4). - Visser quatre boulons 3 en 1 (A) au panneau intérieur droit (5).
Cinquième étape - Unir la moulure gauche du foyer (8) au panneau intérieur gauche (4) en insérant trois boulons dans les trous du panneau (8). Utiliser 3 écrous de blocage décentrés (B) pour bloquer les boulons. - Répéter la même procédure pour la moulure droite (9) et le panneau intérieur droit (5). 9 8 5 4 B Sixième étape - Placer le panneau de base (1) sur une surface plane tel qu’illustré.
Septième étape - Fixer la moulure inférieure du foyer (10) aux moulures gauche (8) et droite(9), et immobiliser avec 2 vis Allen longues (C) et 2 rondelles (D). - Fixer la moulure supérieure du foyer (12) aux panneaux intérieurs (4) et (5) en insérant 2 boulons dans les trous du panneau (12). Utiliser 2 écrous de blocage décentrés (B) pour bloquer les boulons. Poser les moulures gauche (8) et droite (9), et immobiliser avec 4 vis Allen longues (C) à travers 4 rondelles (D) et 2 plaquettes de MDF (H).
Neuvième étape - Localiser le panneau supérieur (15) vu à l’étape 3. - Fixer le panneau supérieur (15) aux pièces assemblées en insérant 4 boulons dans les trous des deux panneaux. Utiliser 4 écrous de blocage décentrés (B) pour bloquer les boulons. - Fixer le support du foyer (11) au panneau de base (1), et immobiliser avec 2 vis Allen longues (C) 15 B 3 C 2 C 11 1 Dixième étape - Insérer 4 supports à tablette (G) dans les trous de chacun des panneaux (2) (4) (3) (5).
Onzième étape - Fixer les 2 panneaux latéraux arrière (16) et le panneau supérieur arrière (17) aux pièces déjà assemblées, et immobiliser avec 26 vis pour panneaux arrière (F). F 17 16 16 Douzième étape Pour l’étape suivante, vous référer au manuel d’instruction inclus avec votre foyer (chambre de combustion). Si vous n’avez pas de manuel d’instruction inclus avec votre foyer (chambre de combustion), ne pas tenter d’assembler ou d’utiliser le foyer.
Garantie et politique de retour Garantie de 90 jours : La compagnie Jensen Metal Products inc. D/B/A Real Flame® garantit les foyers sans ventilation Real Flame et ses accessoires de tout défaut (pièces et main d’œuvre) conformément à un usage régulier et pour une période de 90 jours à partir de la date d’expédition. Dans l’éventualité de défectuosité, la compagnie Jensen remplacera, selon sa convenance, le produit défectueux ou procédera au remboursement du coût d’achat.