Spec Sheet 1

1
L-A2-455
REV 0 - A - 2004291525
SPLIT RURAL OAK LOG PLACEMENT INSTRUCTIONS (RUMFORD COLLECTION)
RUSO-24/30 shown
Important: Adequate ventilation is absolutely
necessary. Adequate spacing
between the logs is NECESSARY
and MUST be maintained. Some
carbon build up (sooting) may occur
where flames strike the logs. If carbon
build up (sooting) continues, rearrange
top logs to allow more opening(s) for
flame(s) before sooting becomes worse.
If any sooting occurs outside of the
firebox (i.e. on the walls), turn off unit
immediately and contact a qualified
professional service technician.
This product is only warranted when used as part of
a Robert H. Peterson Co. vented burner system.
WARNING: Use ONLY a Peterson Real Fyre GR47
Rumford burner with this Real Fyre gas
log set. Failure to do so may result in
property damage or personal injury,
and will void listings, certifications,
and invalidate claims made to RHP.
Contact your local Real Fyre dealer if you
need more information.
This instruction contains recommended log placement for these Real Fyre logs which will promote good
combustion and provide superior flame pattern and appearance. Use these logs only with a Peterson
GR47 Rumford burner system.
Adequate ventilation is absolutely necessary! Provided significant, noticeable sooting does not occur,
some flexibility is possible in log placement to suit your individual preference (see Important below). If you
experience a continued accumulation of black carbon (soot) on your logs it is an indication of incomplete
combustion and you should move the effected log(s) so as to minimize the flame contact on the effected
log(s). If significant sooting continues, stop using this gas log set.
Please read these instructions completely and carefully.
CAUTION...............WARNING...............IMPORTANT
USE ONLY A PETERSON REAL FYRE GR47 RUMFORD BURNERS WITH THIS REAL FYRE LOG SET.
ROBERT H. PETERSON CO. • 14724 East Proctor Avenue • City of Industry, CA 91746
LOG SET IMPORTANT INFORMATION
This log set is to be installed on a
GR47 Rumford burner system.