Installation Guide

Installation Instructions

RN216EFS_B_SpiceDrwrInsrt_0213

Inspect all parts and read all instructions prior to beginning assembly and installation.

Parts Included

A. Spice Drawer Insert



• Tape Measure

• Handsaw

• Sandpaper

• Pencil



SDG-1088

SDG-5800

Step 1 Measure inside

dimensions of the

drawer into which the

insert will fit. Subtract

1/16” from the width

and depth.

Step 2 Transfer the dimensions

to the insert. Trim length

and depth using a fine

tooth handsaw and

cutting at a low angle.

Smooth any rough

edges by using

sandpaper along the

edges. Place insert

in drawer. Installation is

now complete.

DEPTH

WIDTH

step 1

step 2

KNAPE & VOGT MANUFACTURING COMPANY

2700 Oak Industrial Drive NE • Grand Rapids, MI 49505

800.253.1561 • www.kv.com

PAGE 1
Installation Instructions Inspect all parts and read all instructions prior to beginning assembly and installation. Parts Included A. Spice Drawer Insert A Tools Required • Tape Measure • Handsaw • Sandpaper • Pencil Product Assemblies SDG-1088 SDG-5800 Step 1 Step 2 Measure inside dimensions of the drawer into which the insert will fit. Subtract 1/16” from the width and depth. Transfer the dimensions to the insert. Trim length and depth using a fine tooth handsaw and cutting at a low angle.
PAGE 2
Liste des pièces A. Insert de tiroir à épices Lista de partes NOTICE de montage Insert de tiroir à épices Organizador para gaveta de especias A. Organizador para gaveta de especias A Outils indispensables • • • • Mètre en ruban Scie égoïne Papier de verre Crayon Herramientas necesarias • • • • Cinta métrica Sierra de mano Papel de lija Lápiz Instrucciones de instalación Inspectez toutes les pièces et lisez toutes les instructions avant de procéder à l'assemblage et à l'installation.