Instructions / Assembly

9. Mark the center of the holes onto your back cabinet wall. (Fig. 7)
10. Removerearmountingsocketsandtemplatefromthecabinetwallthenremovesocketsfromtemplate.Usinga5/16"drillbit,drillholes1-4.
11. Insert anchors completely into the holes and press the red pin into the anchors by hand to open them, (Fig. 8) then remove red pin.
12. Takeleftrearmountingsocketsandalignscrewlocationswiththeanchorsalongthebackwallofthecabinet.Install#6x5/8"panheadscrewsinto
locations shown. (Fig. 9) Take care not to over tighten the screws in the anchors.
13. Repeat for right back mounting socket, then skip to Step 15.
14. Install#6x5/8"panheadscrewsinlocationsshown(Fig. 10) for the left and right rear br ackets, then
remove template (optional).
15. Determine whether you have a face frame or frameless cabinet. (Fig. 11)
16. If you have a frameless cabinet, continue to Step 17. Otherwise, skip to Step 19.
17. Use Measurement A to mark the left side of the cabinet wall towards the front, measuring from the floor
of the cabinet. (Fig. 11)
18. Alignthetopofthefrontmountingbracketatthemarkand1/8"backfromfrontofcabinet.(Fig. 12)
Skip to Step 22.
Fig. 7
Fig. 9
Fig. 8
Fig. 10
Fig. 11
Fig. 12
19. Measure the face frame width. (Fig. 13)
a. If it is 1-3/4", then do not use the front mounting brackets and skip to Step 27.
b. If it is 1-1/2", then use the front mounting bracket and continue to Step 20.
Face Frame
Frameless
“A”
“A”
“A”
Frameless
20. Use Measurement A to mark the left of the face
frame, measuring from the floor of the cabinet.
(Fig. 14)
21. Align the top of the front mounting bracket with
the mark. Slide the bracket into place so the
back of the face frame catches the lip on the
front mounting bracket as shown. (Fig. 14)
22. Usinga1/8"drillbit,drill1/2"pilotholesinto
the locations indicated. (Fig. 15)
23. Install#6x3/4"panheadscrewsbyhand
using a screwdriver, and then repeat these
steps for right hand mounting bracket.
Fig. 13
Fig. 14 Fig. 15
“A”
“A”
“A”
Face Frame