Installation Guide

ManualsBrandsReal Solutions for Real Life ManualsDinnerware & Stemware Storage2.19 in. x 11.75 in. x 21 in. Tableware Drawer Organizer

Tableware Trays Install Sheets

Two-Tiered Drawer Organizer (ENG)

Economy Double Tiered Cutlery Drawer Insert (ENG)

Tableware & Utility Tray (ENG)

Two-Tiered Drawer Organizer (FR)

Economy Double Tiered Cutlery Drawer Insert (FR)

Tableware & Utility Tray (FR)

Two-Tiered Drawer Organizer (SP)

Economy Double Tiered Cutlery Drawer Insert (SP)

Tableware & Utility Tray (SP)

Summary of content (7 pages)

PAGE 1
Tableware Trays Install Sheets Two-Tiered Drawer Organizer Economy Double Tiered Cutlery Drawer Insert Tableware & Utility Tray (ENG) (ENG) (ENG) Two-Tiered Drawer Organizer Economy Double Tiered Cutlery Drawer Insert Tableware & Utility Tray (FR) (FR) (FR) Two-Tiered Drawer Organizer Economy Double Tiered Cutlery Drawer Insert Tableware & Utility Tray (SP) (SP) (SP)
PAGE 2
TWO-TIERED DRAWER ORGANIZER Installation Instructions Inspect all parts and read all instructions prior to beginning assembly and installation. Step 1 Parts Included A. Tray Assembly B. (2) #8x1/2" woodscrews A Measure interior width of drawer and subtract 1/16" from this dimension. Invert bottom tray and mark equal cuts from each wing to the dimension above. Cutting can be done with a straight edge and utility knife. Care should be taken to make parallel cuts from each wing.
PAGE 3
ECONOMY DOUBLE TIERED CUTLERY DRAWER INSERT Installation Instructions Inspect all parts and read all instructions prior to beginning assembly and installation. Parts Included A. Bottom Tray B. Top Tray C. One pair slides (4 pieces) D. (8)#6-32x1/4” flathead screws E. (4) #6-32 acorn nuts F. (4) #6-32 hex nuts G. (2) #8 washers H. #8x1/2” woodscrews A. Drawer Members 1 Measure interior width of drawer and subtract 1/16” from this dimension.
PAGE 4
Tableware & utility tray Installation Instructions Inspect all parts and read all instructions prior to beginning assembly and installation. Parts Included A. Tray Step 1 Step 2 A Tools Required • Tape Measure • Handsaw or Utility Knife • Sandpaper • Pencil Product Assemblies TW-850 TW-1217 TW-1517 TW-1817 UT-1217 UT-1517 UT-1817 Step 3 Measure inside dimensions of the drawer into which the insert will fit. Subtract 1/16” from the width and depth.
PAGE 5
Liste des pièces A. Assemblée De Plateau B. Vis à bois (pointe aiguë) #8 x 12,7mm (1/2 in.) Piezas Incluidas: A. Asamblea De Bandeja B. Tornillos de madera #8 x 1.3cm (puntiagudos) A B RANGE-COUVERTS À DEUX PLATEAUX LA GAVETA DE DOS NIVELES PARA CUCHILLERÍA Inspectez toutes les pièces et lisez toutes les instructions avant de procéder à l'assemblage et à l'installation. Inspeccione todas las piezas y lea todas las instrucciones antes de comenzar con el armado y la instalación.
PAGE 6
Liste des Pièces A. Plateau inférieur B. Plateau supérieur C. Une paire de glissières (4 pièces) D. (8) vis à tête plate #6-32 x 6,3 mm (1/4 in.) E. (4) écrous borgnes #6-32 F. (4) écrous hexagonaux #6-32 G. (2) rondelles #8 H. vis à bois #8 x 12,7 mm (1/2 in.) Piezas Incluidas: A. Bandeja inferior B. Bandeja superior C. Un par de deslizadores (4 piezas) D. (8) tornillos de cabeza plana #6-32x6.35mm E. (4) tuercas ciegas #6-32 F. (4) tuercas hexagonales #6-32 G. (2) arandelas #8 H. tornillos de madera #8x0.
PAGE 7
Instrucciones de instalación NOTICE de montage Liste des pièces A. Plateau Plateau range-vaisselle et utilitaire Lista de partes Bandeja para servicio de mesa y utensilios A. Bandeja A Outils indispensables • • • • Mètre en ruban Scie égoïne Papier de verre Crayon Herramientas necesarias • • • • Cinta métrica Sierra de mano Papel de lija Lápiz Inspectez toutes les pièces et lisez toutes les instructions avant de procéder à l'assemblage et à l'installation.