User guide

LED Configuration
To modify the behavior of the LEDs on the 460 gateway, navigate to Other->Setup LEDs.
The LED Configuration page lets you configure the LEDs on the gateway.
Each LED may be set to Disabled, Protocol 1, or Protocol 2. If either Protocol is a Master/Client, you may
set the LED to represent either all Slaves/Servers configured in our gateway or a particular Slave/Server
device.
To select a particular Slave/Server device:
a) Select the protocol in the left dropdown menu.
b) Click Save Parameters to generate the second dropdown menu.
c) Select the individual Slave/Server in the right dropdown menu.
Click the Save Parameters button to commit the changes and reboot the gateway.
LED 1 is the LED closest to the Ethernet port on the gateway device.
Real Time Automation, Inc. 55 1-800-249-1612