ELECTRIC PRESSURE WASHER Model BIOP CAUTION : All Operators Must Read These Instructions Before Use.
IMPORTANT! Safety Instructions The appliance has been designed solely for private use outdoors and not for commercial use. Keep this appliance away from heat, direct sunlight, moisture and rain, ice and sharp edges. Do not allow anybody that has not been trained to use a pressure washer to operate the machine without first reading the instruction manual. WARNING! High-pressure washers must not be used by children or untrained persons.
2 If an extension cable is used, the plug and socket must be waterproof and conform to the requirements below regarding the length and dimensions of the cable. 1,0 mm ² max. 12,5 m 1,5mm²max.20 m If the power cable is damaged, it must be replaced by the manufacturer, their service agent or a qualified professional in order to avoid any danger.
Know Your Electric Pressure Washer Read the operator’s manual and safety instructions carefully before operating the electric pressure washer. Compare the illustration below to the electric pressure washer in order to familiarize yourself with the location of the various controls and adjustments. Save this manual for future reference. 1. Spray gun with nozzle 6. Main machine 2. High pressure hose 7.Out-let connector 3. Outlet 8. In-let connector 4. Power cable 9. Water inlet hose 5.
Product Description Purpose • Water inlet pipe • Power cord This high-pressure electric power washer is intended for residential use to clean vehicles, machines, buildings, facades, etc. • Trigger gun holder Areas of application • Two small screws Never use the machine in potentially explosive areas under any circumstances! The operating temperature must be between 32ºF (0ºC) and 104ºF (40ºC).
Technical data Motor Max. pressure Max flow Current Voltage Vibration gun Max. Water Inlet Temperature Assembly Induction 2400PSI 1.5GPM 14.5A 120V~/60Hz Max 1.90 m/s2 1. Position the washer as CLOSE as possible to the water supply. 2. Install water in-let hose (Fig. 1). 104ºF/40ºC Fig.1 The Circuitry 3.Confirm water can get out (Fig. 2). SAFETY DEVICES The unloader valve can reduce pressure if it exceeds pre-set values.
4.Unscrew the outlet hose connection (Fig. 3) Install out-let high pressure hose (Fig.4) 6. Connect the high-pressure hose to the spray gun (Fig. 6). Fig.3 Fig.3 Fig.6 WARNING! Keep hose away from sharp objects. Bursting hoses may cause injury. Examine hoses regularly and replace if damaged. Do not attempt to mend a damaged hose. Fig.4 Fig.4 NOTE: The machine is not suitable for connection to a potable water main. 7. Attach garden hose to water supply (Fig. 7). Fig.7 Connect to water supply 5.
NOTE: Check that the filter is fitted in the Check that the machine is in upright position. garden hose adaptor and that it is not clogged Do not place the machine in high grass! up. 1. Turn the water supply tap on completely. 8. Check that the electrical supply voltage and 2. Release the trigger lock.(Fig.9) .Press the trigger for a few seconds until water flow is frequency (Volt/Hz) correspond to those specified on the pressurewasher rating steady. This will allow air to escape and plate.
by pushing right on the safety lock(Fig.9). 3. Snap the desired nozzle into the spray lance tight. To disconnect a nozzle from the spray lance once the cleaning job is complete: 4. Turn off the pressure washer and shut off the water supply.Pull the trigger to release water pressure. 5. Engage the safety lock on the trigger handle by pushing right on the safety lock(Fig.9). 6. Remove the nozzle from the spray lance. WARNING! Do not make changes to the nozzle while the trigger is engaged.
Working with Patio Cleaner and Brush(optional) The patio cleaner and brush is a powerful accessory for cleaning patio, driveways, car, etc. A quick-connect adaptor is required when working with patio cleaner and brush. To connect a patio cleaner to the spray lance: 1. Turn off the pressure washer and shut off the water supply. Pull the trigger to release water pressure. 2. Engage the safety lock on the trigger handle by pushing right on the safety lock(Fig.11). 3. Remove the nozzle from the spray lance. 4.
removing oil stains, grease, heavy mildew stains, and rust from steel. This nozzle should only be used in areas that can withstand the high-pressure from this nozzle. iii) Use the 25º fan-tip nozzle (green) to clean home siding, brick patios, wood decks, driveways, or sidewalks. When using this nozzle, test a small area first to avoid surface damage. iv) Use the 40º wide-spray tip nozzle (white) to clean items such as cars, trucks, boats, patio furniture, or lawn equipment.
• Disconnect all water connections. • Turn on the machine for a few seconds until the remaining water in the pump exits. Turn off immediately. Fig.13 • Do not allow the high-pressure hose to become kinked. • Store the machine and accessories in a room that does not reach freezing temperatures. water inlet filter • Do not store near a furnace or other sources of heat that may dry out the pump seals.
Troubleshooting Problems Possible Cause Possible Solution Machine refuses to start Faulty receptacle Try another receptacle The fuse has blown Replace the fuse Unplug other appliances Faulty extension cable Try without the extension cable The pump is drawing in air Valves dirty, worn or sticking Check that hoses and connections are airtight.
Limited 2 year warranty Electric pressure washer This Realm® product is warranted by Realm Import And Export (USA) INC. to the original purchaser for two years against defects in workmanship and materials when used for normal residential purposes. The defective product will be replaced or repaired at no charge in either of two ways, and subject to the conditions, limitations, and exclusions noted below. Limitations ·Electric motors and pumps carry a two (2) year warranty.
WEEE - Waste of Electric and Electronic Equipment The symbol on the product or on its packing indicates that this product may not be treated as household waste. Instead it shall be handed over. To the applicable collection point for the recycling of electrical and electronic equipment. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product.
101 wales avenue,Avon,MA 02322,United States Service Hotline: 1-888-899-1688 Email: info@realmimportexport.
