ELECTRIC PRESSURE WASHER BCO-H CAUTION : Do not use this device before reading the instructions.
IMPORTANT! Safety Instructions The appliance has been designed solely for private use outdoors and not for commercial use. Keep this appliance away from heat, direct sunlight, moisture and rain, ice and sharp edges. Do not allow anybody that has not been trained to use a pressure washer to operate the machine without first reading the instruction manual. WARNING! High-pressure washers must not be used by children or untrained persons.
If an extension cable is used, the plug and socket must be waterproof and conform to the requirements below regarding the length and dimensions of the cable. 1,0 mm ² max. 12,5 m 1,5mm²max.20 m If the power cable is damaged, it must be replaced by the manufacturer, their service agent or a qualified professional in order to avoid any danger.
Know Your Electric Pressure Washer Read the operator’s manual and safety instructions carefully before operating the electric pressure washer. Compare the illustration below to the electric pressure washer in order to familiarize yourself with the location of the various controls and adjustments. Save this manual for future reference. 1. Extension spray wand 12. Power cord 2. Trigger gun 13. Pressure washer unit 3. Wrench 14.Onboard storage for QuickConnect nozzles,detergent bottle,brush 4.
Product Description Purpose This high-pressure electric power washer is intended for residential use to clean vehicles, machines, buildings, facades, etc. Areas of application Never use the machine in potentially explosive areas under any circumstances! The operating temperature must be between 32ºF (0ºC) and 104ºF (40ºC). The machine consists of an assembly with a pump, which is encased in a shock-absorbing housing.
Technical data Motor Max. pressure Max flow Current Voltage Water temperature 2. The washer must be used on a secure and stable surface in a standing, upright position (Fig. 1). Brush 2100PSI 1.6GPM 13A 120V~/60Hz 40℃ The Circuitry 3. Screw the transaction handle to the electric pressure washer unit(Fig. 2). Fig.2 SAFETY DEVICES The unloader valve can reduce pressure if it exceeds pre-set values.
5. Snap the spray wand into the trigger gun and rotate it until the two parts are completely locked. (Fig.4) Fig.6 Water outlet Fig.4 Water inlet 6. Insert the high-pressure hose to the trigger gun by pressing the pawl A, then insert another end of high-pressure hose to the water outlet by pressing button B (Fig. 5). Fig.5 A B WARNING! Keep hose away from sharp objects. Bursting hoses may cause injury. Examine hoses regularly and replace if damaged. Do not attempt to mend a damaged hose. 7.
. Make sure the motor switch is pushed to the OFF position before plugging the unit into the power outlet(Fig.8). Fig.8 Operation IMPORTANT! This pressure washer is equipped with a micro-switch sensitive to water flow. This Total Stop System (TSS) senses water flow in the pump. When the trigger is released, water stops flowing through the pump. The TSS then automatically turns the motor off to protect the pump from overheating, thus saving energy and prolonging pump life.
3. Turn the switch to the ON position to start the pressure washer (Fig. 11). Fig.12 Fig.11 Spray lance Using the nozzles CAUTION! NEVER change nozzles without locking the safety lock on the trigger handle. WARNING! High-pressure jets can be dangerous if subject to misuse. The jet must not be directed at persons, pets, live electrical equipment, or the appliance itself. To connect a nozzle to the spray wand: 1.Turn off the pressure washer and shut off the water supply.
washer (Fig. 13). Fig.13 Detergent Valve suction tube Detergent bottle 7.When you have finished using the detergent injection system, insert the bottle detergent with fresh water. Siphon water at low-pressure for one minute to rinse the bottle until it is thoroughly cleaned. CAUTION! Failure to follow these cleaning instructions will cause the injection system to become clogged and inoperable. Working with Patio Cleaner (optional) 2.Connect the bottle to the gun lance.
NOTE: Make sure the rotor arm (C) is properly fixed to the extension lance (A) with the U-pin (D). NOTE: Do not use the Patio Cleaner as a broom but let it surf smoothly over the surface. 5. Connect a patio cleaner to the spray wand same as the installation of nozzle. Working with Angle Nozzle (optional) The angle nozzle can be used for many applications e.g. cleaning the underbody of a car, underneath a lawn mover without being splashed back with debris, etc.
·Store in a dry, covered area where it is not subject to adverse weather conditions. · It is important to store this product in a frost-free area. · Always empty water from all hoses, the pump, and the detergent bottle before storing. CAUTION!The use of a pump protector is recommended to prevent cold weather damage during storage over the winter months.
Fig.18 3.Remove additional debris by back flushing water through the nozzle and spray wand. To do this, place the end of your garden hose (with water running) to the tip of the nozzle, pushing water and debris out of the back opening of the nozzle and spray lance. 4.Keep the machine clean and let cooling air pass freely through the machine vents. 5.To ensure an easy connection and that orings do not dry up; the couplings should be greased regularly.
Trouble shooting Problems Possible Cause The machine will not start The machine is not plugged- Plug the machine in in Faulty receptacle Try another receptacle Fluctuating pressure The machine stops Possible Cause The fuse has blown Replace the fuse Unplug other appliances Faulty extension cable Try without the extension cable The pump is drawing in air Check that hoses and connections are airtight.
Limited 2 year warranty Electric pressure washer This Realm® product is warranted by Realm Import And Export (USA) INC. to the original purchaser for two years against defects in workmanship and materials when used for normal residential purposes. The defective product will be replaced or repaired at no charge in either of two ways, and subject to the conditions, limitations, and exclusions noted below. Limitations ·Electric motors and pumps carry a two (2) year warranty.
WEEE - Waste of Electric and Electronic Equipment The symbol on the product or on its packing indicates that this product may not be treated as household waste. Instead it shall be handed over. To the applicable collection point for the recycling of electrical and electronic equipment. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product.