Replacement Part List

9
Open the lid in the back side of the
pressure washer, add detergent to
the bottle, replace the nozzle of
the spray gun to the detergent
nozzle as below, turn the pressure
washer on, then spray detergent by
pulling the gun trigger.
1. Insert the extension lance into to
the housing
2. Fix the extension lance with the
two screws to the housing
3. Insert the rotor arm into the
extension lance
4. Insert the U-pin to fix the rotor arm.
NOTE: Make sure the rotor arm is
properly fixed to the extension
lance with the U-pin
1.)gun hook assembly ;
4. After use instructions
3.9 Install indicator diagram
3.7 Use of built-in detergent bottle
3.8 Mounting of Patio Cleaner
1
2
3
4