User's Manual

RTL8187L
Datasheet
Wireless LAN Network Interface Controller 5 Track ID JATR-1076-21 Rev. 1.2
6. Pin Descriptions
In order to reduce pin count, and therefore size and cost, some pins have multiple functions. In such cases,
the functions are separated with a ‘/’ symbol. Refer to the Pin Assignments diagram on page 4 for a
graphical representation.
The following signal type codes are used in the tables:
I: Input.
O: Output
T/S: Tri-State bi-directional input/output pin.
S/T/S: Sustained Tri-State.
O/D: Open Drain.
6.1. USB Transceiver Interface
Table 1. USB Transceiver Interface
Symbol Type Pin No Description
HSDP I/O 26 High speed USB D+ signal
HSDM I/O 24 High speed USB D- signal
FSDP I/O 27 Full speed USB D+ signal
FSDM I/O 25 Full speed USB D- signal
RUP N/A 28 External pull-up resistor (1.5kW) for D+ line.
RREF N/A 31 External Reference. Requires 1% precision 6.25K resistor to ground
6.2. EEPROM Interface
Table 2. EEPROM Interface
Symbol Type Pin No Description
EESK O 51 EESK in 93C46 (93C56) programming or auto-load mode.
EEDI O 39 EEDI in 93C46 (93C56) programming or auto-load mode.
EEDO I/O 36 EEDO in 93C46 (93C56) programming or auto-load mode.
EECS O 47 EEPROM Chip Select.
93C46 (93C56) chip select.
6.3. Power Pins
Table 3. Power Pins
Symbol Type Pin No Description
VDD33 P 40, 59, 78, 93, 111 +3.3V (Digital).
AVDD P 2, 9, 22, 29, 32, 127 +3.3V (Analog).
VDD P 44, 53, 72, 82, 90, 96,
105, 115
+1.8V.
GND P 41, 45, 52, 60, 73, 80,
83, 91, 110
Ground (Digital).
AGND P 3, 10, 21, 23, 30, 123,
126, 128
Ground (Analog).